1000 loader return hose length

Farmall Cub Forum -- Questions and answers to all of your Cub related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Bob McCarty
Team Cub Mentor
Team Cub Mentor
Posts: 7586
Joined: Tue May 25, 2004 8:02 pm
Zip Code: 80501
Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
Circle of Safety: Y
Location: CO, Longmont

1000 loader return hose length

Postby Bob McCarty » Fri Feb 28, 2014 7:27 pm

Could one of you that has a 1000 loader measure the length of the low pressure return hose? I believe it is 3/4" ID, but can't find a length in the manual or parts description.

Thanks, Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein

User avatar
Winfield Dave
5+ Years
5+ Years
Posts: 2895
Joined: Thu Apr 22, 2010 2:31 pm
Zip Code: 17953
Tractors Owned: ......Almost enough
Circle of Safety: Y
Location: PA, Middleport (Schuylkill County)

Re: 1000 loader return hose length

Postby Winfield Dave » Sat Mar 01, 2014 7:22 am

Bob...It looks like Messicks has the lengths on the "E-08" diagram.
http://www.messicks.com/CAS/56567.aspx
Dave
"More gold has been mined from the thoughts of men than has been taken from the earth." -- Napoleon Hill

Bob McCarty
Team Cub Mentor
Team Cub Mentor
Posts: 7586
Joined: Tue May 25, 2004 8:02 pm
Zip Code: 80501
Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
Circle of Safety: Y
Location: CO, Longmont

Re: 1000 loader return hose length

Postby Bob McCarty » Sat Mar 01, 2014 9:36 am

Dave, It shows the lengths for the pressure lines but not for the "sump" hose which is what I need. Thanks for looking.

Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein

User avatar
Barnyard
Team Cub
Team Cub
Posts: 19939
Joined: Tue Aug 07, 2007 3:39 pm
Zip Code: 45030
Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100
Circle of Safety: Y
Location: OH, New Haven (Hamilton County)

Re: 1000 loader return hose length

Postby Barnyard » Sat Mar 01, 2014 10:33 am

Bob, I got the measurements we talked about on the phone. Under the Cub like mine (owner mod perhaps) the hose is 48". Over the hood looks like it would be about 36". I measured from the touch control on the Cub to the bottom fitting on the loader reservoir. That 48" measurement includes the mess of fittings that have been added on mine that you probably don't need.

Here is how it is run on mine.
loaderhose.jpg


Here is that mess of fittings I mentioned.
[
loaderfitting.jpg
You do not have the required permissions to view the files attached to this post.
It is common sense to take a method and try it. If it fails, admit it frankly and try another. But above all, try something.
- Franklin D. Roosevelt -

Circle of Safety

User avatar
Denny Clayton
10+ Years
10+ Years
Posts: 4122
Joined: Wed Feb 05, 2003 1:18 pm
Zip Code: 45365
Tractors Owned: Home to "Rusty", the 2007 and 2009 Cub Tug Champion.
Circle of Safety: Y
Location: OH, Sidney

Re: 1000 loader return hose length

Postby Denny Clayton » Sat Mar 01, 2014 11:22 am

Bob, on the below installation I used a 3 footer. That was what the old one was. It has been on a Cub, Lo-Boy and now a 140 and it works fine.

Image
'61 Lo-Boy
'60 FH Lo-Boy
'60 Lo-Boy
'57 FH Cub "Rusty"
'48 Cub
C-3 mower, FH Woods 42F, 54A blade, L-54 blade, 194 plow, FH L-38 disk, FH LB disk, 144 cultivators, FH platform carrier

Bob McCarty
Team Cub Mentor
Team Cub Mentor
Posts: 7586
Joined: Tue May 25, 2004 8:02 pm
Zip Code: 80501
Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
Circle of Safety: Y
Location: CO, Longmont

Re: 1000 loader return hose length

Postby Bob McCarty » Sat Mar 01, 2014 11:24 am

Thanks Bill and Denny.

Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein


Return to “Farmall Cub”

Who is online

Users browsing this forum: midmo, Steve Butram and 4 guests