Farmall Cub

Any idea on the belt size for my sickle bar mower? I'll include pick, but I don't have one from the back. It's a small belt, from the PTO to Sicle drive...

Thank you!

Nice Cub! Here's a link to a previous post (Barnyard gets the credit): viewtopic.php?f=1&t=63620&p=519859&hilit=sickle+mower+belt+size#p519859
And welcome to the Forum.

Bob

Thanks Bob!!! (great quote)

I have the same plow/grader blade but it is installed much differently. Is this the correct/preferred way? Beautiful Cub!

Posco wrote:I have the same plow/grader blade but it is installed much differently. Is this the correct/preferred way? Beautiful Cub!

Posco: check out TM Tractor (one of our sponsors) for pictures of various model blades and setup. Scroll down to Leveling and Grader Blade here: http://www.tm-tractor.com/gim/gim_001.htm. Also, check out the manuals section for the Cub-54 installation instructions.

Faithracer: very nice Cub with blade and mower!! Welcome!!

How is yours installed? I assume you're talking about the front installation, that's the way it was on it when bought, we can also install it directly under the midsection for leveling/spreading.

IIRC, specifically the belt is a B43 with the larger pulley, and a B42 with the smaller pulley.

Thank you all so very much for the great welcoming, ideas, and suggestions. One thing I forgot to mention is that the pic I listed was just for show, I only use 1 accessory at a time. Plus, I have a disc plow, and to belt systems to run a saw mill off the PTO, pretty cool (one looks absolutely brand new!).

Thank you all again and God Bless!

“Do nothing out of selfish ambition or vain conceit, but in humility consider others better than yourselves. Each of you should look not only to your own interests, but also to the interests of others.”- Philippians 2:3-4

It looks like Bob got you the belt size info. I was going to ask how that mower connected with the blade attached but you answered that before I could ask. Nice looking Cub for sure.