This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Hydraulic Block Cover Torque
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 19
- Joined: Sat Oct 21, 2006 10:06 pm
- Location: Franksville, WI
Hydraulic Block Cover Torque
Anyone know what the hydraulic block cover bolts ( the ones on the bottom) should be torqued to? One write-up in the How-to forum says 35 but does not specify in-lbs or foot-lbs. Thanks
- John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: Hydraulic Block Cover Torque
those are 5/16 standard grade bolts and according to the chart in the front of the service manual only torque to 13 ft. lbs. Normally when someone says a bolt torques to X pounds, they are referring to foot pounds.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
Who is online
Users browsing this forum: Gary Dotson, Mike in Louisiana, ShawnAgne and 30 guests