This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Hydraulic Block Cover Torque
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 19
- Joined: Sat Oct 21, 2006 10:06 pm
- Location: Franksville, WI
Hydraulic Block Cover Torque
Anyone know what the hydraulic block cover bolts ( the ones on the bottom) should be torqued to? One write-up in the How-to forum says 35 but does not specify in-lbs or foot-lbs. Thanks
-
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: Hydraulic Block Cover Torque
those are 5/16 standard grade bolts and according to the chart in the front of the service manual only torque to 13 ft. lbs. Normally when someone says a bolt torques to X pounds, they are referring to foot pounds.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
- Similar Topics
- Replies
- Views
- Last post
-
- 2
- 209
-
by Magnum
Thu May 27, 2021 9:24 pm
-
- 2
- 195
-
by JustJim
Sat Jun 04, 2022 9:44 am
-
- 3
- 166
-
by NJ Farmer
Tue May 09, 2023 12:25 am
-
- 2
- 248
-
by tst
Wed Jul 28, 2021 6:28 pm
-
- 2
- 219
-
by Binky Tremain
Wed Sep 15, 2021 10:05 pm
Who is online
Users browsing this forum: No registered users and 4 guests