This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
The Cub Club -- Questions and answers to all of your Cub related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
I posted for Ed, these pictures of an distributor he's working on…I'm sure he will explain more in detail….Super Glue confabbed to replace the bracket and screw...
Tractors Owned: 6"F" cubs 5 lo-boys 1 154 1 184 1 IH444 1 Oliver OC3 crawler 1 AC D10 1 IH 100 manure spreader 1 IH model B corn grinder 3 power units cub demonstrator
Condenser was glued into place. Luckily,, the installer didn't clean the surfaces well, so it pried off,, without too much effort. A little scraping, took off the remainder. All this, because he lost the screw? Every time I think I've seen all they can mess up I'm proven wrong! Ed
Those little screws are a PIA..... the last time I cracked open a distributor I put a pertronics electronic ignition in it! Much easier to set the points...... just depends on how big the opening in the trash can is
1971 Cub (Rufus) 1950 Cub (Cathy) 1965 Lo Boy Fast Hitch (Nameless III) 1970 Cub 1000 Loader & Fast Hitch (Lee)