This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

Snowplow mounting plate

The Cub Club -- Questions and answers to all of your Cub related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Post Reply
4evr fixin
10+ Years
10+ Years
Posts: 15
Joined: Sun Apr 06, 2014 9:26 pm
Zip Code: 16053

Snowplow mounting plate

Postby 4evr fixin » Fri Sep 19, 2014 8:31 pm

I got a 54A blade but it didn't come with the mounting plate. Shouldn't be too hard to make since I have a nice thick piece of steel but I'm not sure how far the bottom hole is from the middle hole. Also I know that I saw some good pics here somewhere of one mounted just not sure where.
Top

SPONSOR AD

Sponsor

Sponsor
 
Top
User avatar
randallc
Cub Pro
Cub Pro
Posts: 1906
Joined: Tue Jan 18, 2011 9:16 am
Zip Code: 72940
Tractors Owned: 1951 Farmall Cub, 152 disk plow, 2 gang disk, belly mower, sickle mower
1949 Farmall Cub, cultivator, moldboard plow, disk,front blade. Cub Cadet, LTX1045 Mower. Cub Cadet's 109, 125, 1000, and 1250
1961 cub c2 belly mower and full blade. 48 cub manual lift with cultivators.
1947 Cub
Circle of Safety: Y
Location: Huntington, AR

Re: Snowplow mounting plate

Postby randallc » Sat Sep 20, 2014 3:49 am

Tm Tractor parts, a sponsor of this forum, has some excellent photos: http://www.tmtractor.com/tm-tractor/gim ... 4a_001.htm. Maybe this can help you out.
Guinea, 1951 Farmall Cub; Jumping Willy, 1949 Farmall Cub, 61 Cub, Scrapy, and 48 Cub Al, 48 cub, Billy D.
Image
Top
User avatar
PoconoCub
5+ Years
5+ Years
Posts: 391
Joined: Thu Sep 04, 2014 3:55 pm
Zip Code: 18330
Tractors Owned: .
1957 Farmall Cub
1953 Farmall Cub
1949 Farmall Cub
1948 Farmall Cub
1948 Farmall Super A
Circle of Safety: Y
Location: Effort, PA
Contact:
Contact PoconoCub

Re: Snowplow mounting plate

Postby PoconoCub » Sat Sep 20, 2014 7:13 am

4evr fixin wrote:I got a 54A blade but it didn't come with the mounting plate. Shouldn't be too hard to make since I have a nice thick piece of steel but I'm not sure how far the bottom hole is from the middle hole. Also I know that I saw some good pics here somewhere of one mounted just not sure where.


You just have the blade and nothing else?
Scott
ImageCircle of Safety
Top
User avatar
PoconoCub
5+ Years
5+ Years
Posts: 391
Joined: Thu Sep 04, 2014 3:55 pm
Zip Code: 18330
Tractors Owned: .
1957 Farmall Cub
1953 Farmall Cub
1949 Farmall Cub
1948 Farmall Cub
1948 Farmall Super A
Circle of Safety: Y
Location: Effort, PA
Contact:
Contact PoconoCub

Re: Snowplow mounting plate

Postby PoconoCub » Sat Sep 20, 2014 7:31 am

Checkout the following, they should help:

GraderMounting Layout http://www.cleancomputes.com/Cub/Sketches%20or%20Plans/Drawings-Sketches-Pictures/Chad%20Penny/GraderMounting-Layout2.pdf

Cub-54A Bell Crank Extension http://www.cleancomputes.com/Cub/Sketches%20or%20Plans/Drawings-Sketches-Pictures/Rudy%20Oblak/CADD%20Jpg%20Files/FCUB_BCRANK_EXTENSION_53.jpg

Leveling Blade Angle Plate Page 1 http://www.cleancomputes.com/Cub/Sketches%20or%20Plans/Drawings-Sketches-Pictures/Rudy%20Oblak/CADD%20Jpg%20Files/FCUB_SPLOW_ANGLE_SHEET1.jpg

Leveling Blade Angle Plate Page 2 http://www.cleancomputes.com/Cub/Sketches%20or%20Plans/Drawings-Sketches-Pictures/Rudy%20Oblak/CADD%20Jpg%20Files/FCUB_SPLOW_ANGLE_SHEET2.jpg

Leveling Blade Pin Tab 1 http://www.cleancomputes.com/Cub/Sketches%20or%20Plans/Drawings-Sketches-Pictures/Rudy%20Oblak/CADD%20Jpg%20Files/FCUB_SPLOW_PINTAB1.jpg

Leveling Blade Pin Tab 2 http://www.cleancomputes.com/Cub/Sketches%20or%20Plans/Drawings-Sketches-Pictures/Rudy%20Oblak/CADD%20Jpg%20Files/FCUB_SPLOW_PINTAB2.jpg
Scott
ImageCircle of Safety
Top
User avatar
tmays
10+ Years
10+ Years
Posts: 3408
Joined: Wed May 11, 2011 8:59 pm
Zip Code: 39154
Tractors Owned: 1969 Farmall Cub
1952 Cub
1942 Farmall H
Location: Raymond, MS

Re: Snowplow mounting plate

Postby tmays » Sat Sep 20, 2014 8:05 am

I believe he's just wanting the measurement on the flat rectangular plate that mounts to the torque tube. I'm not where I can go measure mine

Edit: Here's a thread for you if I'm correct on the part you need
viewtopic.php?f=1&t=75838&p=608822&hilit=Axle+brace+support#p608822
Thomas
Top
4evr fixin
10+ Years
10+ Years
Posts: 15
Joined: Sun Apr 06, 2014 9:26 pm
Zip Code: 16053

Re: Snowplow mounting plate

Postby 4evr fixin » Sat Sep 20, 2014 10:24 am

Thanks, I knew I saw those somewhere just couldn't remember where. Thanks tmays that was exactly what I needed. I was mounting it directly to the lowest housing hole but the blade barely comes off the ground. Plus I don't want to beat up the hole.
Top
User avatar
PoconoCub
5+ Years
5+ Years
Posts: 391
Joined: Thu Sep 04, 2014 3:55 pm
Zip Code: 18330
Tractors Owned: .
1957 Farmall Cub
1953 Farmall Cub
1949 Farmall Cub
1948 Farmall Cub
1948 Farmall Super A
Circle of Safety: Y
Location: Effort, PA
Contact:
Contact PoconoCub

Re: Snowplow mounting plate

Postby PoconoCub » Sat Sep 20, 2014 10:35 am

tmays wrote:I believe he's just wanting the measurement on the flat rectangular plate that mounts to the torque tube. I'm not where I can go measure mine


If he only needs the extension plate the first link has the exact dimensions
Scott
ImageCircle of Safety
Top
User avatar
tmays
10+ Years
10+ Years
Posts: 3408
Joined: Wed May 11, 2011 8:59 pm
Zip Code: 39154
Tractors Owned: 1969 Farmall Cub
1952 Cub
1942 Farmall H
Location: Raymond, MS

Re: Snowplow mounting plate

Postby tmays » Sat Sep 20, 2014 10:42 am

PoconoCub wrote:
If he only needs the extension plate the first link has the exact dimensions


Sorry, I didn't click on the links. You are correct of course.
Thomas
Top
Post Reply

Return to “Farmall Cub”

Who is online

Users browsing this forum: Steve Butram and 23 guests