This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

Engine / gearbox interface

The Cub Club -- Questions and answers to all of your Cub related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Post Reply
UK-Cub
5+ Years
5+ Years
Posts: 232
Joined: Mon Jun 16, 2014 3:48 pm
Zip Code: LA9
Circle of Safety: Y
Location: Kendal, England

Engine / gearbox interface

Postby UK-Cub » Tue Oct 14, 2014 3:36 pm

Sorry I hijacked - asked this in someone else's thread.

Is the Cub engine / gearbox interface a standard SAE?

http://www.oemdynamics.com.au/PDF/Engine.pdf

David
David

1956 Lister D stationary engine
1957 French Cub
2012 Land Rover Defender 110 double cab pick up

Every day is a school day

"Choose a job you love and you will never have to work a day in your life" Confucius
Top

SPONSOR AD

Sponsor

Sponsor
 
Top
Bob McCarty
Team Cub
Team Cub
Posts: 11851
Joined: Tue May 25, 2004 8:02 pm
Zip Code: 80501
Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
Circle of Safety: Y
Location: CO, Longmont

Re: Engine / gearbox interface

Postby Bob McCarty » Tue Oct 14, 2014 3:40 pm

All the threads on a US Cub are SAE except for the spark plugs which are in mm. I don't think there are any other oddball fasteners, although there are a few unusual sizes that can be hard to find.

Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein
Top
UK-Cub
5+ Years
5+ Years
Posts: 232
Joined: Mon Jun 16, 2014 3:48 pm
Zip Code: LA9
Circle of Safety: Y
Location: Kendal, England

Re: Engine / gearbox interface

Postby UK-Cub » Tue Oct 14, 2014 4:15 pm

Hello Bob,

My query was about the flywheel housing, wondered if it was on this list?

David
Attachments
image.jpg
http://www.oemdynamics.com.au/PDF/Engine.pdf
image.jpg (146.65 KiB) Viewed 232 times
David

1956 Lister D stationary engine
1957 French Cub
2012 Land Rover Defender 110 double cab pick up

Every day is a school day

"Choose a job you love and you will never have to work a day in your life" Confucius
Top
Eugene
Team Cub Mentor
Team Cub Mentor
Posts: 20370
Joined: Fri Jul 02, 2004 9:52 pm
Zip Code: 65051
Circle of Safety: Y
Location: Mo. Linn

Re: Engine / gearbox interface

Postby Eugene » Tue Oct 14, 2014 5:16 pm

Question. Is flywheel housing the same as bell housing?

I don't know the answer. My long deceased uncle use to be an engineer at the Louisville, KY facilities. Sure wish I could ask him some questions.

There are some SAE bell housing charts on the internet. Most require measurements to determine which or if you have an SAE standard.

I have never had an occasion to measure up a bell housing.
I have an excuse. CRS.
Top
Bob McCarty
Team Cub
Team Cub
Posts: 11851
Joined: Tue May 25, 2004 8:02 pm
Zip Code: 80501
Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
Circle of Safety: Y
Location: CO, Longmont

Re: Engine / gearbox interface

Postby Bob McCarty » Tue Oct 14, 2014 6:34 pm

David, I misunderstood your question and I can't answer it. Maybe one of the engine guys will know.

Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein
Top
Post Reply

Return to “Farmall Cub”

Who is online

Users browsing this forum: No registered users and 47 guests