I H 1000 Loader

Farmall Cub Forum -- Questions and answers to all of your Cub related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
LeoM
Cub Star
Cub Star
Posts: 112
Joined: Sun Dec 07, 2014 7:02 pm
Zip Code: 32713
Tractors Owned: FARMALL FORUM
1966 Cub w/ IH 1000 Loader
1958 LoBoy w/ Wagner 45 Loader
1952 Cub w/ Woods 48" Bush Hog
1948 Super A w/ Finish Mower
1944 A w/ 3 Point Hitch
Circle of Safety: Y
Location: Central Florida

I H 1000 Loader

Postby LeoM » Tue Dec 23, 2014 1:06 pm

Will the I H 1000 directly bolt up to a 1966 standard cub ? Are there different designs for the I H 1000 ? What should I look for as far as condition or concerns for the I H 1000 ?

User avatar
Bigdog
Cub Pro
Cub Pro
Posts: 24142
Joined: Sun Feb 02, 2003 12:50 pm
Zip Code: 43113
Circle of Safety: Y
Location: OH, Circleville

Re: I H 1000 Loader

Postby Bigdog » Tue Dec 23, 2014 1:24 pm

It should bolt right up.
As far as things to watch - inspect all the welds and play close attention to the condition of the bushings at all the pivot points. Look for any obvious twists in the arm. The bucket / forks take most of the abuse but they will get beat up even with careful use. But should be in reasonable condition.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.

My wife says I don't listen to her. - - - - - - - - Or something like that!

Image

http://www.cubtug.com

Matt Kirsch
10+ Years
10+ Years
Posts: 4434
Joined: Tue Jun 08, 2004 3:04 pm
Zip Code: 14559
Circle of Safety: Y
Location: Rochester, NY

Re: I H 1000 Loader

Postby Matt Kirsch » Tue Dec 23, 2014 1:29 pm

I believe 1000 loader will bolt up to any standard/Farmall Cub, any "offset" Loboy, any Super A, 100, 130, or 140, with no modifications. For sure, it will bolt up to any year Cub, especially if it came off a Cub.

Pins, bushings and cylinders are the "problem areas" on any loader. Beyond that look for cracks, welds etc..

Jim Becker
Team Cub
Team Cub
Posts: 12909
Joined: Sun Feb 02, 2003 2:59 pm
Zip Code: 55319
Circle of Safety: Y
Location: MN

Re: I H 1000 Loader

Postby Jim Becker » Tue Dec 23, 2014 2:08 pm

Check whether the back ends of the frame have been cut off. When on a Lo-Boy, the rear bolt holes of the frame are not used. A lot of people torch off the "excess". After that, it will only fit a Lo-Boy.

LeoM
Cub Star
Cub Star
Posts: 112
Joined: Sun Dec 07, 2014 7:02 pm
Zip Code: 32713
Tractors Owned: FARMALL FORUM
1966 Cub w/ IH 1000 Loader
1958 LoBoy w/ Wagner 45 Loader
1952 Cub w/ Woods 48" Bush Hog
1948 Super A w/ Finish Mower
1944 A w/ 3 Point Hitch
Circle of Safety: Y
Location: Central Florida

Re: I H 1000 Loader

Postby LeoM » Tue Dec 23, 2014 4:35 pm

Thanks all.

Bob McCarty
Team Cub
Team Cub
Posts: 8227
Joined: Tue May 25, 2004 8:02 pm
Zip Code: 80501
Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
Circle of Safety: Y
Location: CO, Longmont

Re: I H 1000 Loader

Postby Bob McCarty » Tue Dec 23, 2014 4:45 pm

The design change that I am aware of is the shape of the control levers and knobs. There may have been others, but they won't change your ability to mount it.

Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein

LeoM
Cub Star
Cub Star
Posts: 112
Joined: Sun Dec 07, 2014 7:02 pm
Zip Code: 32713
Tractors Owned: FARMALL FORUM
1966 Cub w/ IH 1000 Loader
1958 LoBoy w/ Wagner 45 Loader
1952 Cub w/ Woods 48" Bush Hog
1948 Super A w/ Finish Mower
1944 A w/ 3 Point Hitch
Circle of Safety: Y
Location: Central Florida

Re: I H 1000 Loader

Postby LeoM » Wed Dec 24, 2014 10:41 pm

In the operators manual on page 18 "SPECIFICATIONS" under the "Operation" heading there are 2 specs I am not familiar with "Breakout Capacity" measured in PSI and "Full Height Lift" also measured in PSI. Does this refer to load capacity in lbs. ??????

User avatar
Boss Hog
Cub Pro
Cub Pro
Posts: 10213
Joined: Mon Oct 24, 2005 8:35 pm
Zip Code: 23962
eBay ID: dmb2613
Circle of Safety: Y
Location: VA. Randolph

Re: I H 1000 Loader

Postby Boss Hog » Thu Dec 25, 2014 10:53 am

If you have never had a 1000 loader , dont expect too much out of it As far as I am concerned it is more of a novelty item on a cub.
Boss
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg

User avatar
John *.?-!.* cub owner
Team Cub Guide
Team Cub Guide
Posts: 22117
Joined: Sun Feb 02, 2003 2:09 pm
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
Location: Mo, Potosi

Re: I H 1000 Loader

Postby John *.?-!.* cub owner » Thu Dec 25, 2014 12:36 pm

Any loader on a cub has it's limitations and uses. They are great for loading manure or gravel/sand that is in a pile. Mine gets used mostly for hauling firewood and dumping it into my basement wood room and picking up and moving heavy items outside the shop. They do not go down low enough to do much actual digging, plus a cub does not have the weight or power to dig, not to mention the fact that the front wheels are wider than the bucket.
If you are not part of the solution,
you are part of the problem!!!

Scrivet
5+ Years
5+ Years
Posts: 2517
Joined: Sun Apr 19, 2009 9:51 pm
Zip Code: 63664
Location: MO, Potosi

Re: I H 1000 Loader

Postby Scrivet » Thu Dec 25, 2014 7:07 pm

Boss Hog wrote:If you have never had a 1000 loader , dont expect too much out of it As far as I am concerned it is more of a novelty item on a cub.
Boss

:Dito:
Beats using a shovel but it's not a steam shovel :lol:

User avatar
Barnyard
Team Cub
Team Cub
Posts: 20556
Joined: Tue Aug 07, 2007 3:39 pm
Zip Code: 45030
Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100
Circle of Safety: Y
Location: OH, New Haven (Hamilton County)

Re: I H 1000 Loader

Postby Barnyard » Thu Dec 25, 2014 8:47 pm

Scrivet wrote:Beats using a shovel...

And wheelbarrow!

A couple of years ago I stripped top soil so I could widen my drive. I used the three point tiller on my Kubota to loosen the soil then I put the 1000 to work moving the dirt. It was a lot cheaper than renting a bobcat and I wasn't rushed with having to return a rental. It didn't take much longer this way either.

Image

It also came in handy when it was time to put the ties in place.

Image
It is common sense to take a method and try it. If it fails, admit it frankly and try another. But above all, try something.
- Franklin D. Roosevelt -

Circle of Safety

User avatar
Winfield Dave
5+ Years
5+ Years
Posts: 2997
Joined: Thu Apr 22, 2010 2:31 pm
Zip Code: 17953
Tractors Owned: ......Almost enough
Circle of Safety: Y
Location: PA, Middleport (Schuylkill County)

Re: I H 1000 Loader

Postby Winfield Dave » Fri Dec 26, 2014 8:52 am

Boss Hog wrote:If you have never had a 1000 loader , dont expect too much out of it As far as I am concerned it is more of a novelty item on a cub.
:headbang

25 tons of shale / fill loaded and hauled.
2013-5-10 shale (13)red.jpg


Multiple loads of firewood logs loaded.
2013-07-12_08-05-34_396 red.jpg
Dave
"More gold has been mined from the thoughts of men than has been taken from the earth." -- Napoleon Hill

User avatar
Buzzard Wing
Cub Pro
Cub Pro
Posts: 10491
Joined: Mon Aug 09, 2004 10:14 pm
Zip Code: 02840
Location: RI, Newport

Re: I H 1000 Loader

Postby Buzzard Wing » Sat Dec 27, 2014 11:31 am

If it is previously removed from a tractor make sure you have ALL the stray parts. Especially; the piece that goes into the front 'tube' (steering gear bolster), the elbow (return line) for the TC and the manifold for the TC. The major (only) differences between a Cub and 140 'versions' are the length of the control levers and the size of the bucket. I like the 140 bucket, it is about 1/3 bigger.
It is for me a wheelbarrow that doesn't tip over. Limited but still very useful. It has no down pressure on the bucket, so is not the best for 'back dragging' to level out material (or changing a front tire).
With a fast hitch it is like a Swiss Army Knife!
1971 Cub (Rufus) 1950 Cub (Cathy) 1965 Lo Boy Fast Hitch (Nameless III) 1970 Cub 1000 Loader & Fast Hitch (Lee)

LeoM
Cub Star
Cub Star
Posts: 112
Joined: Sun Dec 07, 2014 7:02 pm
Zip Code: 32713
Tractors Owned: FARMALL FORUM
1966 Cub w/ IH 1000 Loader
1958 LoBoy w/ Wagner 45 Loader
1952 Cub w/ Woods 48" Bush Hog
1948 Super A w/ Finish Mower
1944 A w/ 3 Point Hitch
Circle of Safety: Y
Location: Central Florida

Re: I H 1000 Loader

Postby LeoM » Sun Dec 28, 2014 12:10 pm

Thank you. I bought everything that was available but essentially I will need to rebuild the unit entirely. I got the Sub Frame with the control valve manifold, and front mount which I believe is the piece that goes into the front tube. It's "A" shaped with a round pin about 10" long with 2 spacers and suspends the sub frame below the tractor. I also got the boom and bucket and both hydraulic rams. All hydraulic hoses, most were missing, were beyond use and will need to be replaced. All pins and bushings will probably need replacing. From looks of the external condition I will disassemble the hydraulic cylinders and valve manifold and replace all soft parts.
I do not know what you mean by "TC and the manifold for the TC". Please explain.
Once again thanks for your help
Leo

Eugene
Team Cub Mentor
Team Cub Mentor
Posts: 16105
Joined: Fri Jul 02, 2004 9:52 pm
Zip Code: 65051
Circle of Safety: Y
Location: Mo. Linn

Re: I H 1000 Loader

Postby Eugene » Sun Dec 28, 2014 12:21 pm

TC = touch control = hydraulic system
I have an excuse. CRS.


  • Similar Topics
    Replies
    Views
    Last post

Return to “Farmall Cub”

Who is online

Users browsing this forum: No registered users and 4 guests