I need crossover numbers if anyone has them for oil seal #480043SSR national and CR16117 also the seal for the right final drive where the shaft for the planter gear goes on it's a one piece seal made with the cover it's around $60.00 at IH I have been told by a local mechanic that he found a seal that would work without buying the cover but couldn't remember the number or where he bought it the number on the cover is National 6180SSO and a crossover number for a bearing IH86608991 the Timken number is hard to read it's 14158A or14138A it' the carrier bearing for the ring gear housing.
THANKS
Jim
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Oil Seal Help
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 1301
- Joined: Fri Jan 30, 2004 10:51 am
- Location: East Bend,NC
-
- Team Cub
- Posts: 17278
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: Oil Seal Help
At least some of your answers are probably in this list.
http://www.atis.net/CubFAQ/cub_faq.html#q7
http://www.atis.net/CubFAQ/cub_faq.html#q7
Who is online
Users browsing this forum: No registered users and 58 guests