Number one cylinder on cub

Farmall Cub Forum -- Questions and answers to all of your Cub related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Tiller1940
Cub Star
Cub Star
Posts: 53
Joined: Tue Aug 25, 2015 2:48 pm
Zip Code: 66042
Tractors Owned: 1937 Farmall F-12
1938 Farmall F-20
1940 Farmall B
1940 Farmall A
1950 Farmall C
1952 Farmall Cub

Number one cylinder on cub

Postby Tiller1940 » Sun Sep 13, 2015 4:56 pm

I have my cub apart because later this week I am converting it to 12 volt from 6 volt I was checking compression on the cylinders the number one cylinder has little to no compression the other 3 have fairly strong compression what causes no compression? I don't have a tester I just put my thumb over the whole and cranked it.

ScottyD'sdad
Cub Pro
Cub Pro
Posts: 6503
Joined: Thu Aug 31, 2006 7:00 pm
Zip Code: 02769
Tractors Owned: 6"F" cubs
5 lo-boys
1 154
1 184
1 IH444
1 Oliver OC3 crawler
1 AC D10
1 IH 100 manure spreader
1 IH model B corn grinder
3 power units
cub demonstrator
Circle of Safety: Y
Location: Ma. Rehoboth

Re: Number one cylinder on cub

Postby ScottyD'sdad » Sun Sep 13, 2015 5:08 pm

Valves needing attention, or worn piston rings. Since it's low in one, I'd suspect a sticking valve. Remove the valve cover, and watch the valves, while someone cranks the engine. You'll likely see the problem.
Ed
Image
Member of Chapter 18, and National
Circle of Safety


  • Similar Topics
    Replies
    Views
    Last post

Return to “Farmall Cub”

Who is online

Users browsing this forum: chet larsen and 7 guests