Mott mower bracket

Farmall Cub Forum -- Questions and answers to all of your Cub related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Kirk-NJ
5+ Years
5+ Years
Posts: 708
Joined: Sat Jan 03, 2009 1:15 pm
Zip Code: 07838
Location: Great Meadows NJ

Mott mower bracket

Postby Kirk-NJ » Mon Nov 02, 2015 5:51 am

I picked up a mott mower yesterday. The only part that was missing was the bracket that connects to the Jockey rod hook. #22 in the manual the Jockey rod anchor. Should be easy enough to make if someone can give me some measurements.

Thanks, Kirk

Bob McCarty
Team Cub
Team Cub
Posts: 8315
Joined: Tue May 25, 2004 8:02 pm
Zip Code: 80501
Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
Circle of Safety: Y
Location: CO, Longmont

Re: Mott mower bracket

Postby Bob McCarty » Mon Nov 02, 2015 12:32 pm

Kirk, The stock is 2" x 5/8". The long piece is 9", the short piece is 2 1/2". The two holes on the long piece are 5/8" in diameter and spaced to fit the implement pad holes, also the edge of the hole at the end is 1/2" from the end of the stock. The hole in the short piece is 7/8" in diameter. The edge of that hole is 3/4" from the end. Let me know if any of that isn't clear.

Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein

Kirk-NJ
5+ Years
5+ Years
Posts: 708
Joined: Sat Jan 03, 2009 1:15 pm
Zip Code: 07838
Location: Great Meadows NJ

Re: Mott mower bracket

Postby Kirk-NJ » Mon Nov 02, 2015 3:11 pm

That's perfectly clear Bob. Thanks for the info.

Kirk


  • Similar Topics
    Replies
    Views
    Last post

Return to “Farmall Cub”

Who is online

Users browsing this forum: jsr348 and 5 guests