This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
RH final drive axle nut seal
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 54
- Joined: Mon Dec 23, 2013 9:38 pm
- Zip Code: 93010
- Tractors Owned: 1952 Cub
RH final drive axle nut seal
I just pulled the retainer off and found that there are two seals in the retainer. Are there supposed to be two? This is for the right hand final drive axle nut oil seal? again
-
- 10+ Years
- Posts: 54
- Joined: Mon Dec 23, 2013 9:38 pm
- Zip Code: 93010
- Tractors Owned: 1952 Cub
Re: RH final drive axle nut seal
Nevermind.. I pushed it out and saw it was one thick seal.
-
- Team Cub Mentor
- Posts: 4127
- Joined: Tue Jan 11, 2005 12:12 pm
- Zip Code: 13830
- eBay ID: adak8965
- Circle of Safety: Y
- Location: Oxford, NY
Re: RH final drive axle nut seal
Must be the original
- John *.?-!.* cub owner
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: RH final drive axle nut seal
In several locations on the older IH rigs they used 2 seals in a single housing. The replacement is only a single one though.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
- 10+ Years
- Posts: 54
- Joined: Mon Dec 23, 2013 9:38 pm
- Zip Code: 93010
- Tractors Owned: 1952 Cub
Re: RH final drive axle nut seal
yep..i could see leather in the seal
Who is online
Users browsing this forum: MrBee and 29 guests