Weld on shifting gate???

Farmall Cub Forum -- Questions and answers to all of your Cub related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
cub67
Posts: 15
Joined: Tue Feb 10, 2015 1:46 pm
Zip Code: 44601
Tractors Owned: 67 Cub
45 JD A
Circle of Safety: Y

Weld on shifting gate???

Postby cub67 » Fri Dec 04, 2015 2:24 pm

shifter bottom_338x600.jpg
I am slowly getting back to working on my cub as time and money permit. I pulled the shifter cover off a while ago and set it aside. I went to take it apart to clean it up and it looks like the po welded the shifting gate to the cover. I can't figure out why unless it was loose? Would it fall down and interfere with anything? Would this be common practice for cubs?

User avatar
Barnyard
Team Cub
Team Cub
Posts: 20635
Joined: Tue Aug 07, 2007 3:39 pm
Zip Code: 45030
Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100
Circle of Safety: Y
Location: OH, New Haven (Hamilton County)

Re: Weld on shifting gate???

Postby Barnyard » Fri Dec 04, 2015 2:28 pm

the original would just be a friction fit. He may have had problems with it in the past.
It is common sense to take a method and try it. If it fails, admit it frankly and try another. But above all, try something.
- Franklin D. Roosevelt -

Circle of Safety

Clip
Cub Star
Cub Star
Posts: 195
Joined: Thu Jul 10, 2014 7:18 am
Zip Code: 24551
Circle of Safety: Y

Re: Weld on shifting gate???

Postby Clip » Fri Dec 04, 2015 4:01 pm

Mine had a tab in the location of your weld, I assume to prevent it from being inserted farther than necessary during assembly.


  • Similar Topics
    Replies
    Views
    Last post

Return to “Farmall Cub”

Who is online

Users browsing this forum: Bill E Bob, Bill V in Md, Shane Nelson, strandedisland, Tom Clark and 5 guests