First time cub owner and first post on site
Not new to working on tractors so have some insight
Alright to the prob just got 1964 cub loboy (not running) been sitting outside for at least 2+ years with hood removed
No water in engine thankfully
Got it running today started right up runs nice ran it for no more then a minute just the fuel in carb refilled carb
and started again checked oil gauge no reading so removed gauge and cranked engine No oil removed filter top
and no oil and looks like has't seen oil in a while nice and clean and dry
Relief valve?
Pickup tube?
Oil pump ?
Any help is greatly appreciated
thank you
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Need help no oil pressher
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
concretetogo
- 5+ Years
- Posts: 6
- Joined: Sat Feb 06, 2016 6:24 pm
- Zip Code: 64850
- Tractors Owned: 64 cub loboy
72 deutz 3006
Kubota 2900
Johndeere 110tlb
89 cat 931
-
ScottyD'sdad
- Cub Pro
- Posts: 7508
- Joined: Thu Aug 31, 2006 7:00 pm
- Zip Code: 02769
- Tractors Owned: 6"F" cubs
5 lo-boys
1 154
1 184
1 IH444
1 Oliver OC3 crawler
1 AC D10
1 IH 100 manure spreader
1 IH model B corn grinder
3 power units
cub demonstrator - Circle of Safety: Y
- Location: Ma. Rehoboth
Re: Need help no oil pressher
Prime the oil pump. Theres a hole in the oil filter housing. Squirt a couple of ounces of oil into it, then turn the engine over and watch for oil spitting out the hole. May need to repeat the priming. When a stream of oil comes out of the opening, close up the filter housing, and you should get oil pressure.
Ed
Ed
Member of Chapter 18, and National
-
Muletrain
- 5+ Years
- Posts: 41
- Joined: Thu Dec 03, 2015 4:11 pm
- Zip Code: 27909
- Tractors Owned: 48 Cub 49 Cub 55 Cub 64 Cub 78 Cub 44 A Farm Trac 390 4x4 David Bradleys, Planet Jr.s 2 mini donkeys
- Location: Elizabeth city N.C.
- Contact:
Re: Need help no oil pressher
I did the same first time I serviced my cub. Makes your heart sink when oil pressure gauge will not come up!
-
Glen
- 10+ Years
- Posts: 6146
- Joined: Mon Mar 19, 2012 7:33 pm
- Zip Code: 00000
- Tractors Owned: 1956 Farmall Cub with Fast Hitch, F-11 plow, Disc, Cultivator, Cub-22 mower
- Circle of Safety: Y
- Location: Wa.
Re: Need help no oil pressher
Hi,
Welcome to the website. Here is a picture of where the hole is, just remove the oil filter top, and it is easy to see, use a light if you need to.
I fill a clean oil can with motor oil, and pump it into the hole, you might need more than one filling of the oil can to fill the passages in the engine.
Welcome to the website. Here is a picture of where the hole is, just remove the oil filter top, and it is easy to see, use a light if you need to.
I fill a clean oil can with motor oil, and pump it into the hole, you might need more than one filling of the oil can to fill the passages in the engine.
- Attachments
-
Last edited by Glen on Sat Feb 06, 2016 8:54 pm, edited 1 time in total.
-
concretetogo
- 5+ Years
- Posts: 6
- Joined: Sat Feb 06, 2016 6:24 pm
- Zip Code: 64850
- Tractors Owned: 64 cub loboy
72 deutz 3006
Kubota 2900
Johndeere 110tlb
89 cat 931
Re: Need help no oil pressher
Hay guys thanks I'll give it a try in am and let you know what happens
-
concretetogo
- 5+ Years
- Posts: 6
- Joined: Sat Feb 06, 2016 6:24 pm
- Zip Code: 64850
- Tractors Owned: 64 cub loboy
72 deutz 3006
Kubota 2900
Johndeere 110tlb
89 cat 931
Re: Need help no oil pressher
Could not wait till am primed oil pump and bobs your uncle 30psi
Again thanks I,ll sleep good tonight
Again thanks I,ll sleep good tonight
-
UK-Cub
- 5+ Years
- Posts: 232
- Joined: Mon Jun 16, 2014 3:48 pm
- Zip Code: LA9
- Circle of Safety: Y
- Location: Kendal, England
Re: Need help no oil pressher
Fantastic post, brilliantly answers every query about priming the oil pump / system.
David
1956 Lister D stationary engine
1957 French Cub
2012 Land Rover Defender 110 double cab pick up
Every day is a school day
"Choose a job you love and you will never have to work a day in your life" Confucius
1956 Lister D stationary engine
1957 French Cub
2012 Land Rover Defender 110 double cab pick up
Every day is a school day
"Choose a job you love and you will never have to work a day in your life" Confucius
-
Glen
- 10+ Years
- Posts: 6146
- Joined: Mon Mar 19, 2012 7:33 pm
- Zip Code: 00000
- Tractors Owned: 1956 Farmall Cub with Fast Hitch, F-11 plow, Disc, Cultivator, Cub-22 mower
- Circle of Safety: Y
- Location: Wa.
Re: Need help no oil pressher
Hi,
Thanks for the kind words, UK-Cub. I only wrote half the info, Ed wrote before I did, and probably knows more about a Cub than I do. 
Thanks for the kind words, UK-Cub. I only wrote half the info, Ed wrote before I did, and probably knows more about a Cub than I do.
Who is online
Users browsing this forum: No registered users and 51 guests
