Ok couple of questions here.
1. I need to wire my head lights and the original wires aren't there. Will any type of wire work for a 6V system for headlights?
2. As far as the tail light what is the correct bracket to mount the tail light to the battery box?
Thanks in advance,
Shawn Agne
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Wiring head light and tail light bracket question
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- ShawnAgne
- 5+ Years
- Posts: 838
- Joined: Sat May 07, 2016 5:13 pm
- Zip Code: 45380
- Tractors Owned: 1952 Cub w/ 184 motor (Kid)
12V with Petronix
IH 3160 Mower Deck
54 Leveling Blade
193 Plow
IH528 Trailer
Front/Rear Weights
1955 Farmall 300 (Clarence)
12V with Petronix
Woods L306 72"
1955 Farmall 100 (Thomas)
12V with Petronix
Woods L59 60"
A60 Leveling Blade
Front/Rear Weights - Circle of Safety: Y
- Location: Versailles, Ohio
-
- 10+ Years
- Posts: 5184
- Joined: Tue Jan 12, 2010 2:08 pm
- Zip Code: 12514
- Circle of Safety: Y
Re: Wiring head light and tail light bracket question
here is a link from tm tractor that shows the bracket
http://www.tmtractor.com/tm-tractor/gel ... et_001.htm
the wiring diagrams are in the owners manuals, depending upon year they are different, you can find the manuals if you do not have one on the site
http://www.tmtractor.com/tm-tractor/gel ... et_001.htm
the wiring diagrams are in the owners manuals, depending upon year they are different, you can find the manuals if you do not have one on the site
- Urbish
- 10+ Years
- Posts: 2427
- Joined: Sat Sep 07, 2013 3:45 pm
- Zip Code: 48158
- Tractors Owned: ~
1958 International Cub LoBoy
1947 Farmall H
1946 Farmall B
1953 Willys CJ3B
2022 Massey Ferguson GC1723E Subcompact
Cub Loboy L-54 Leveling and Grader Blade - Circle of Safety: Y
- Location: Manchester, MI
Re: Wiring head light and tail light bracket question
Here's the link to buy the bracket from TM Tractor. Note that the light grounds through the mount, so you will need to scrape some paint from the lug where the light attaches and where the bracket meets the battery box.
http://www.tmtractor.com/new/el/427fp.htm
http://www.tmtractor.com/new/el/427fp.htm
Jim
- ShawnAgne
- 5+ Years
- Posts: 838
- Joined: Sat May 07, 2016 5:13 pm
- Zip Code: 45380
- Tractors Owned: 1952 Cub w/ 184 motor (Kid)
12V with Petronix
IH 3160 Mower Deck
54 Leveling Blade
193 Plow
IH528 Trailer
Front/Rear Weights
1955 Farmall 300 (Clarence)
12V with Petronix
Woods L306 72"
1955 Farmall 100 (Thomas)
12V with Petronix
Woods L59 60"
A60 Leveling Blade
Front/Rear Weights - Circle of Safety: Y
- Location: Versailles, Ohio
Re: Wiring head light and tail light bracket question
Is there another part that the light goes on to for this bracket as the post for the light will be vertical? I'm looking at the one that has the switchable white/red filter.
Thanks in advance,
Shawn
Thanks in advance,
Shawn
Shawn Agne
- Bill V in Md
- 10+ Years
- Posts: 1109
- Joined: Sun Feb 02, 2003 6:51 pm
- Zip Code: 21228
- Tractors Owned: 1948 Farmall Cub
LT1045 Cub Cadet - Circle of Safety: Y
- Location: MD, Catonsville
- Contact:
Re: Wiring head light and tail light bracket question
ShawnAgne wrote:Is there another part that the light goes on to for this bracket as the post for the light will be vertical? I'm looking at the one that has the switchable white/red filter.
Thanks in advance,
Shawn
There is a "C" Clamp that fits over the bracket post. It is shown in the parts manual and you can find a photo on TM Tractor Parts Website.
Bill VanHooser
Cub 54 Blade, Cub 193 Moldboard Plow, Cub 28A Disc Harrow
Cub 54 Blade, Cub 193 Moldboard Plow, Cub 28A Disc Harrow
- Slim140
- 5+ Years
- Posts: 4908
- Joined: Wed Nov 22, 2017 6:24 am
- Zip Code: 00000
- Tractors Owned: .
1970 International 140
1972 International 140
1949 John Deere A
1993 Ford 4630 W/Loader
1965 John Deere 110
1961 Cub Cadet Original - Circle of Safety: Y
Re: Wiring head light and tail light bracket question
I just took this picture of the one on our '47 yesterday. It has everything but the light and is original.
Every home is a school, what are you teaching?
- ShawnAgne
- 5+ Years
- Posts: 838
- Joined: Sat May 07, 2016 5:13 pm
- Zip Code: 45380
- Tractors Owned: 1952 Cub w/ 184 motor (Kid)
12V with Petronix
IH 3160 Mower Deck
54 Leveling Blade
193 Plow
IH528 Trailer
Front/Rear Weights
1955 Farmall 300 (Clarence)
12V with Petronix
Woods L306 72"
1955 Farmall 100 (Thomas)
12V with Petronix
Woods L59 60"
A60 Leveling Blade
Front/Rear Weights - Circle of Safety: Y
- Location: Versailles, Ohio
Re: Wiring head light and tail light bracket question
Ends up in the bucket of parts I got with the tractor I had the bracket. But what is the extra hook on it for?
Shawn Agne
- Bill V in Md
- 10+ Years
- Posts: 1109
- Joined: Sun Feb 02, 2003 6:51 pm
- Zip Code: 21228
- Tractors Owned: 1948 Farmall Cub
LT1045 Cub Cadet - Circle of Safety: Y
- Location: MD, Catonsville
- Contact:
Re: Wiring head light and tail light bracket question
ShawnAgne wrote:Ends up in the bucket of parts I got with the tractor I had the bracket. But what is the extra hook on it for?
There is a small bracket that is used to support the cable (see below photo). I assume that is what you are referring to.
Bill VanHooser
Cub 54 Blade, Cub 193 Moldboard Plow, Cub 28A Disc Harrow
Cub 54 Blade, Cub 193 Moldboard Plow, Cub 28A Disc Harrow
- ShawnAgne
- 5+ Years
- Posts: 838
- Joined: Sat May 07, 2016 5:13 pm
- Zip Code: 45380
- Tractors Owned: 1952 Cub w/ 184 motor (Kid)
12V with Petronix
IH 3160 Mower Deck
54 Leveling Blade
193 Plow
IH528 Trailer
Front/Rear Weights
1955 Farmall 300 (Clarence)
12V with Petronix
Woods L306 72"
1955 Farmall 100 (Thomas)
12V with Petronix
Woods L59 60"
A60 Leveling Blade
Front/Rear Weights - Circle of Safety: Y
- Location: Versailles, Ohio
Re: Wiring head light and tail light bracket question
Yes that is what I was referring to. Thank you.
Shawn Agne
Who is online
Users browsing this forum: No registered users and 23 guests