Page 1 of 1

Rear main seal

Posted: Sun May 29, 2016 1:42 pm
by Coventry plumber
Hi all, I am trying to get I touch with Rick Prentice to have my 48 retainer refurbished , can anyone point me in the right direction? Thanks in advance! Tom

Re: Rear main seal

Posted: Sun May 29, 2016 2:24 pm
by bob in CT
Rick is long out of the business. Tim Talleur does them now, screen name tst. I'll send him a PM on your behalf since you don't have enough posts to send one yet (protects us from spammers)

Re: Rear main seal

Posted: Sun May 29, 2016 2:25 pm
by Bill Hudson
Tom,

Rick no longer does the rear seals. Tim Talleur (tst) does them now. Check this post in The VINE:
http://www.farmallcub.com/phpBB2/viewtopic.php?f=223&t=92907

Bill

Re: Rear main seal

Posted: Sun May 29, 2016 2:27 pm
by Coventry plumber
Thank you Bill. I appreciate it
Tom

Re: Rear main seal

Posted: Sun May 29, 2016 5:22 pm
by tst
Hi Tom, welcome to the forum, sent you a message
Tim

Re: Rear main seal

Posted: Sun May 29, 2016 5:22 pm
by Coventry plumber
Thanks Tim , I'll send it in a few weeks. I can't PM yet.

Re: Rear main seal

Posted: Tue Jul 11, 2017 1:25 pm
by tomcat44
Hello, does anyone know how to PM Tim Talleur to have a rear seal housing machined for the correct fit with a new seal.

I see post by not sure how to reach him. New to the site

IH 184 I working on. Chris

Re: Rear main seal

Posted: Tue Jul 11, 2017 2:39 pm
by clemk
tomcat44 wrote:Hello, does anyone know how to PM Tim Talleur to have a rear seal housing machined for the correct fit with a new seal.

I see post by not sure how to reach him. New to the site

IH 184 I working on. Chris



Hi, Chris.Welcome to the forum. Being pretty new myself, I just found out you don't have enough posts to send a pm yet. I'll take a cue from an earlier post, and send him one for you. He'll get back to you, I'm sure

Re: Rear main seal

Posted: Tue Jul 11, 2017 3:13 pm
by tst
just follow the instructions in this link

viewtopic.php?f=223&t=97405

Re: Rear main seal

Posted: Tue Jul 11, 2017 9:31 pm
by tomcat44
Thanks for the help !!!

Re: Rear main seal

Posted: Thu Dec 07, 2017 9:29 pm
by Greasyoveralls
Hello all,
I am also looking for a way to contact Tim Talleur. I have 2 cub rear main seal housings that I want to have seals installed into in preparation for replacing the clutches and rear main seals in two 1948 cub tractors.
Greg

Re: Rear main seal

Posted: Thu Dec 07, 2017 10:07 pm
by staninlowerAL
He posts as tst. You can try to contact him by PM by clicking on his "name" in the 2nd post just above this. You can then send him a message.