I have a replacement carb on my Cub with a 1 5/8" OD and the original tube from the air cleaner is 1 1/2" OD.
I previously removed the air cleaner and ran a K&N right on the carb. That got lost when I moved and I would
like to put the air cleaner back on. I cannot find a hose to fit.
Any ideas on a short hose to adapt top these two sizes?
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
intake hose
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 112
- Joined: Thu May 11, 2006 12:19 pm
- Zip Code: 53809
- Location: Fennimore, Wi
intake hose
49 Cub, 72 154 LoBoy
-
- 5+ Years
- Posts: 2821
- Joined: Wed Jul 08, 2015 10:24 am
- Zip Code: 19342
- Tractors Owned: 1948 6v - Dozer
1949 with kub klipper belly mower. mag 6v - Mom
1950 with plow, 54 blade, mott mag 6v - Roxanne
1953 54 blade, c22, wood 42 6v
1957 6v - barn Queen
1965 lo-boy with c-3 mower 12 v - Loboy
1974 Horse II 12 v c-2
1975 with woods 42-6 12 v - Horse
1979 long strip 12 v stuck engine
130 with international 1000 loader 6 v
1969 140 with bush hog tow behind mower 12 v
Terramite T-6 4WD Backhoe Perkins diesel
Memberships: Rough and Tumble Engineers Historical Association;Chapter 8 IH Collectors; IH Collectors Worldwide - Circle of Safety: Y
- Location: Glen Mills PA
Re: intake hose
TM sells a replacement hose http://www.tmtractor.com/new/ae/4537fp.htm
Do you happen to remember the K&N model or part number us used? I spent some time on their site a while back did not find anything.
Do you happen to remember the K&N model or part number us used? I spent some time on their site a while back did not find anything.
When you only have 9 horsepower you need to know the names of all of the ponies!
-
- 10+ Years
- Posts: 112
- Joined: Thu May 11, 2006 12:19 pm
- Zip Code: 53809
- Location: Fennimore, Wi
Re: intake hose
So, the part form TM replaces the rubber hose at the carb, the steel pipe up to the air cleaner and the rubber hose at the air cleaner?
I do not remember what the part number for the K&N filter was. An old parts guy I worked with looked it up in a catalog before the days of computers.
It was a clamp on tapered cone that just fit in lengthwise. I have not been able to find it on K&N site or Green Filter site.
I do not remember what the part number for the K&N filter was. An old parts guy I worked with looked it up in a catalog before the days of computers.
It was a clamp on tapered cone that just fit in lengthwise. I have not been able to find it on K&N site or Green Filter site.
49 Cub, 72 154 LoBoy
-
- 10+ Years
- Posts: 112
- Joined: Thu May 11, 2006 12:19 pm
- Zip Code: 53809
- Location: Fennimore, Wi
Re: intake hose
I am looking at this http://www.bikebandit.com/aftermarket-p ... air-filter
1 5/8" figures to just under 42mm.
1 5/8" figures to just under 42mm.
49 Cub, 72 154 LoBoy
- Bill Hudson
- Team Cub
- Posts: 9526
- Joined: Wed Jul 26, 2006 10:50 am
- Zip Code: 44057
- Tractors Owned: 57 F-Cub - Dad & Mom's Cub
77 F-Cub - Red Long Stripe - Circle of Safety: Y
- Location: OH, Madison
Re: intake hose
Looks like a K&N RC-2290 or RC-2294 will work on a 1 5/8" diameter inlet, given the specs call for the mounting flange to expand 1/16" to accommodate in-between sizes.
Bill
Bill
- Glen
- 10+ Years
- Posts: 6149
- Joined: Mon Mar 19, 2012 7:33 pm
- Zip Code: 00000
- Tractors Owned: 1956 Farmall Cub with Fast Hitch, F-11 plow, Disc, Cultivator, Cub-22 mower
- Circle of Safety: Y
- Location: Wa.
Re: intake hose
Hi,
Yes, if you have a Zenith carb, which they used on Cubs 1975 and newer, the 1 piece hose replaces the 3 pieces used with the IH carb.
Some people put a Zenith carb on in place of the IH carb, on the Cubs older than 1975.
Here are pages from the Cub parts book showing the parts. The 3rd page shows a Zenith Carb.
http://www.farmallcub.info/manuals/cub_ ... 012-30.jpg
http://www.farmallcub.info/manuals/cub_ ... 012-31.jpg
http://www.farmallcub.info/manuals/cub_ ... 012-14.jpg
Yes, if you have a Zenith carb, which they used on Cubs 1975 and newer, the 1 piece hose replaces the 3 pieces used with the IH carb.
Some people put a Zenith carb on in place of the IH carb, on the Cubs older than 1975.
Here are pages from the Cub parts book showing the parts. The 3rd page shows a Zenith Carb.
http://www.farmallcub.info/manuals/cub_ ... 012-30.jpg
http://www.farmallcub.info/manuals/cub_ ... 012-31.jpg
http://www.farmallcub.info/manuals/cub_ ... 012-14.jpg
Who is online
Users browsing this forum: No registered users and 51 guests