This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Distributor Cap
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 5+ Years
- Posts: 37
- Joined: Sun Aug 14, 2016 11:11 am
- Zip Code: 16137
- Tractors Owned: 1953 F-Cub Serial No. 160499JL
Distributor Cap
I recently adding all new plugs, wires, cap, rotor, etc. I noticed that the old IH cap had three 3/16" holes in the inside of the cap between post #3 & #2. Are these factory?
-
- 10+ Years
- Posts: 5184
- Joined: Tue Jan 12, 2010 2:08 pm
- Zip Code: 12514
- Circle of Safety: Y
Re: Distributor Cap
yes, vent holes
-
- 5+ Years
- Posts: 37
- Joined: Sun Aug 14, 2016 11:11 am
- Zip Code: 16137
- Tractors Owned: 1953 F-Cub Serial No. 160499JL
Re: Distributor Cap
Should these be added to new caps that do not have these holes?
-
- 10+ Years
- Posts: 5184
- Joined: Tue Jan 12, 2010 2:08 pm
- Zip Code: 12514
- Circle of Safety: Y
Re: Distributor Cap
if the cap has brass inserts you can, aluminum inserts I would not as they corrode easier, not that important
Who is online
Users browsing this forum: Majestic-12 [Bot] and 24 guests