This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Differentials done, 3 more parts then swap motor
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- ShawnAgne
- 5+ Years
- Posts: 846
- Joined: Sat May 07, 2016 5:13 pm
- Zip Code: 45380
- Tractors Owned: 1952 Cub w/ 184 motor (Kid)
12V with Petronix
IH 3160 Mower Deck
54 Leveling Blade
193 Plow
IH528 Trailer
Front/Rear Weights
1955 Farmall 300 (Clarence)
12V with Petronix
Woods L306 72"
1955 Farmall 100 (Thomas)
12V with Petronix
Woods L59 60"
A60 Leveling Blade
Front/Rear Weights - Circle of Safety: Y
- Location: Versailles, Ohio
Differentials done, 3 more parts then swap motor
Well got the differential seals replaced. You guys aren't kidding the right one is a real pain. Anyways all done and put back together. Now I'm stripping all the engine parts off to put the new motor on Clarence. Just have to remove the fan, carb, and the hyrdaulic lines on the left side and I'll be ready to split and put the new motor on.
Shawn Agne
- farmergiffIV
- 10+ Years
- Posts: 203
- Joined: Sat Aug 17, 2013 8:36 pm
- Zip Code: 97526
- Tractors Owned: 1948 FCub
1953 FCub - Location: Oregon
Re: Differentials done, 3 more parts then swap motor
how did this project go for you?
Who is online
Users browsing this forum: No registered users and 59 guests