Is there some trick to remove the control valve pin (part #352 028 R1)?
Yes, I took the cotter pin out, but twisting and pulling is not really moving it.
John
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Touch Control Pin
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 164
- Joined: Mon Oct 17, 2011 4:56 pm
- Zip Code: 02738
- Tractors Owned: 1949 Cub
1964 JD1010 - Location: Marion, Massachusetts
-
- 10+ Years
- Posts: 5184
- Joined: Tue Jan 12, 2010 2:08 pm
- Zip Code: 12514
- Circle of Safety: Y
Re: Touch Control Pin
did you loosen the set screw in the middle of the pin ?
-
- 10+ Years
- Posts: 164
- Joined: Mon Oct 17, 2011 4:56 pm
- Zip Code: 02738
- Tractors Owned: 1949 Cub
1964 JD1010 - Location: Marion, Massachusetts
Re: Touch Control Pin
Thanks Tim,
There was so much dirt and gunk (the dirt had mold growing on it) that I couldn't see that there was a set screw.
John
There was so much dirt and gunk (the dirt had mold growing on it) that I couldn't see that there was a set screw.
John
-
- 5+ Years
- Posts: 35
- Joined: Sun Oct 16, 2016 6:26 pm
- Zip Code: V0X1C2
- Tractors Owned: 1943 Farmall A
1948 Farmall Cub
1999 New Holland TN55D
2008 JD 3720
Re: Touch Control Pin
Hi
Is the pin threaded in to the ram or lift arms or just slip in. Tap it out or unscrew it to remove? I have a broken one at the lock nut.
Thx Ken
Is the pin threaded in to the ram or lift arms or just slip in. Tap it out or unscrew it to remove? I have a broken one at the lock nut.
Thx Ken
Ken K
Cawston BC Canada
1948 FCUB #56087
1943 Farmall A FAA78723
1962 Farmall 140 Hi-Clear 17059 JHC
1999 New Holland TN55D
2008 JD 3720
Our tractors work for a living!
The Cawston Market Farmer
Cawston BC Canada
1948 FCUB #56087
1943 Farmall A FAA78723
1962 Farmall 140 Hi-Clear 17059 JHC
1999 New Holland TN55D
2008 JD 3720
Our tractors work for a living!
The Cawston Market Farmer
-
- 10+ Years
- Posts: 164
- Joined: Mon Oct 17, 2011 4:56 pm
- Zip Code: 02738
- Tractors Owned: 1949 Cub
1964 JD1010 - Location: Marion, Massachusetts
Re: Touch Control Pin
Kenk,
I got this photo from a Buzzard Wing post and circled the pin I think you are ashing about.
Is this the pin you mean?
John
I got this photo from a Buzzard Wing post and circled the pin I think you are ashing about.
Is this the pin you mean?
John
- tmays
- 10+ Years
- Posts: 3402
- Joined: Wed May 11, 2011 8:59 pm
- Zip Code: 39154
- Tractors Owned: 1969 Farmall Cub
1952 Cub
1942 Farmall H - Location: Raymond, MS
Re: Touch Control Pin
If you're referring to the pin Parlowmillfarm has circled, then nut has to be unscrewed to remove it
Thomas
-
- 5+ Years
- Posts: 35
- Joined: Sun Oct 16, 2016 6:26 pm
- Zip Code: V0X1C2
- Tractors Owned: 1943 Farmall A
1948 Farmall Cub
1999 New Holland TN55D
2008 JD 3720
Re: Touch Control Pin
Great
That is the pin just wanted to make sure the nut is the only thing holding it in
Thx Jen
That is the pin just wanted to make sure the nut is the only thing holding it in
Thx Jen
Ken K
Cawston BC Canada
1948 FCUB #56087
1943 Farmall A FAA78723
1962 Farmall 140 Hi-Clear 17059 JHC
1999 New Holland TN55D
2008 JD 3720
Our tractors work for a living!
The Cawston Market Farmer
Cawston BC Canada
1948 FCUB #56087
1943 Farmall A FAA78723
1962 Farmall 140 Hi-Clear 17059 JHC
1999 New Holland TN55D
2008 JD 3720
Our tractors work for a living!
The Cawston Market Farmer
Who is online
Users browsing this forum: Floater and 23 guests