This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
New Rebuild hyd not working
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 136
- Joined: Sat Feb 15, 2003 9:23 am
- Location: Ashville Alabama
New Rebuild hyd not working
52 cub had a complete rebuild 14 years ago. This pass year while mowing she broke a crank. she is back fresh again with a new crank. Hyd block and pump was rebuilt. Started up good touch control worked good, engine ran good. She sit for 3 weeks while I was out of town. Started her up yesterday for a final check before putting the hood on. Touch control will not work, fluid is full, has not pumped fluid into the engine.
-
- 10+ Years
- Posts: 5183
- Joined: Tue Jan 12, 2010 2:08 pm
- Zip Code: 12514
- Circle of Safety: Y
Re: New Rebuild hyd not working
put a gauge on it and check pump pressure, that will tell you if it is the pump or touch control
-
- 10+ Years
- Posts: 136
- Joined: Sat Feb 15, 2003 9:23 am
- Location: Ashville Alabama
Re: New Rebuild hyd not working
where should the gauge be installed?
Who is online
Users browsing this forum: Greenthumbfarms and 32 guests