PTO pulley guard

Farmall Cub Forum -- Questions and answers to all of your Cub related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Stevetractor
Cub Star
Cub Star
Posts: 88
Joined: Wed Apr 08, 2015 1:03 pm
Zip Code: B0v1a0
Tractors Owned: 1952 Farmall Cub
1955 Farmall Cub
1968 Farmall Cub

PTO pulley guard

Postby Stevetractor » Wed Mar 08, 2017 7:38 am

Hello to all. Working on my 68 Cub and am looking for the dimensions for the L shaped piece of steel that was used as a pulley guard. From memory it was made out of 1/8"plate, 4 3/8 wide. (could measure that from the rust stain it left :D Here's where it gets cloudy. I'm guessing it extented 6 inches from the two 1/2" transmission bolt holes, then was bent at a 90 degree angle down over pulley another 4" or 5 ". If someone has one of these I would appreciate the exact measurements. Pretty sure these were an IH part as two of our Cubs at home had them. Thank you for assistance :help:

tst
5+ Years
5+ Years
Posts: 2613
Joined: Tue Jan 12, 2010 2:08 pm
Zip Code: 12514
Circle of Safety: Y

Re: PTO pulley guard

Postby tst » Wed Mar 08, 2017 7:49 am

Is this the guard you are looking for?
Attachments
ptog.jpg

Stevetractor
Cub Star
Cub Star
Posts: 88
Joined: Wed Apr 08, 2015 1:03 pm
Zip Code: B0v1a0
Tractors Owned: 1952 Farmall Cub
1955 Farmall Cub
1968 Farmall Cub

Re: PTO pulley guard

Postby Stevetractor » Wed Mar 08, 2017 3:16 pm

Yup, that's the one.

User avatar
Glen
5+ Years
5+ Years
Posts: 1976
Joined: Mon Mar 19, 2012 7:33 pm
Zip Code: 00000
Tractors Owned: 1956 Farmall Cub with Fast Hitch, F-11 plow, Disc, Cultivator, Cub-22 mower
Circle of Safety: Y
Location: Wa.

Re: PTO pulley guard

Postby Glen » Wed Mar 08, 2017 8:04 pm

Hi,
The shield was used with the Cub 22 mower. Here is a page from the Cub 22 mower owner's manual showing it.
The guard on my Cub measures 7 1/8" along the top to the bend, then the vertical metal is 6" down from the top surface. The width is 4 1/2", the thickness is 1/8". :)

http://farmallcub.com/rudi_cub/www.clea ... e%2016.jpg


  • Similar Topics
    Replies
    Views
    Last post

Return to “Farmall Cub”

Who is online

Users browsing this forum: tnestell and 4 guests