Hi All,
I am working on rebuilding the hydraulic block on my '57 lo boy and I damaged the inside of the pressure regulator bushing while trying to get it out. I tried the allen wrench trick in the following post an it slipped and scored the inner wall. My question is, what do I do now?
Can I buy a new piece? If so where?
Or will it be ok?
Thanks for the help,
Brad
viewtopic.php?f=141&t=42857
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Damage to hydraulic block pressure regulator bushing
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 5+ Years
- Posts: 5
- Joined: Sat Sep 10, 2016 1:57 pm
- Zip Code: 47201
- Location: Columbus, IN
- Glen
- 10+ Years
- Posts: 6146
- Joined: Mon Mar 19, 2012 7:33 pm
- Zip Code: 00000
- Tractors Owned: 1956 Farmall Cub with Fast Hitch, F-11 plow, Disc, Cultivator, Cub-22 mower
- Circle of Safety: Y
- Location: Wa.
Re: Damage to hydraulic block pressure regulator bushing
Hi,
If you can't smooth up the part so the surface is good, a Case IH dealer might still have new parts. Here are pages from the Cub parts manual showing the Touch Control. Find the part number of the part, if you are going to ask them. This is the 360719R1 block in the pic.
http://www.farmallcub.info/manuals/cub_ ... 010-05.jpg
http://www.farmallcub.info/manuals/cub_ ... 010-06.jpg
http://www.farmallcub.info/manuals/cub_ ... 010-07.jpg
If you can't smooth up the part so the surface is good, a Case IH dealer might still have new parts. Here are pages from the Cub parts manual showing the Touch Control. Find the part number of the part, if you are going to ask them. This is the 360719R1 block in the pic.
http://www.farmallcub.info/manuals/cub_ ... 010-05.jpg
http://www.farmallcub.info/manuals/cub_ ... 010-06.jpg
http://www.farmallcub.info/manuals/cub_ ... 010-07.jpg
-
- 5+ Years
- Posts: 5
- Joined: Sat Sep 10, 2016 1:57 pm
- Zip Code: 47201
- Location: Columbus, IN
Re: Damage to hydraulic block pressure regulator bushing
Thanks Glen,
I checked with the dealer and they no longer carry the part. Will have to figure something else out.
I checked with the dealer and they no longer carry the part. Will have to figure something else out.
-
- Team Cub
- Posts: 11859
- Joined: Tue May 25, 2004 8:02 pm
- Zip Code: 80501
- Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
- Circle of Safety: Y
- Location: CO, Longmont
Re: Damage to hydraulic block pressure regulator bushing
You might be able to have a machine shop ream it and go to a slightly larger o-ring (?). A post in the Vine may turn up a used one also.
Bob
Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein
we need to think differently."
-Albert Einstein
Who is online
Users browsing this forum: No registered users and 60 guests