So how do people lube and or grease the tool bar joints on a Farmall CUB.
Thanks
Rocketman
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
How To Lube and Grease Tool Bar Joints
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- Rocket Man
- 10+ Years
- Posts: 68
- Joined: Wed May 29, 2013 8:44 pm
- Zip Code: n1e2b5
- Tractors Owned: At the Farm today\
1951 Farmall Cub
1980 Roper 20t
- Stevetractor
- 5+ Years
- Posts: 233
- Joined: Wed Apr 08, 2015 1:03 pm
- Zip Code: B0v1a0
- Tractors Owned: 1952 Farmall Cub
1955 Farmall Cub
1968 International Cub - Contact:
Re: How To Lube and Grease Tool Bar Joints
Just my humble opinion, I don't. Once the grease or oil gets dust and sand stuck in it it makes for great grinding compound. I prefer clean and dry.
- Rocket Man
- 10+ Years
- Posts: 68
- Joined: Wed May 29, 2013 8:44 pm
- Zip Code: n1e2b5
- Tractors Owned: At the Farm today\
1951 Farmall Cub
1980 Roper 20t
Re: How To Lube and Grease Tool Bar Joints
thanks Steve what if they are a little seized up they move but not easy,
Who is online
Users browsing this forum: No registered users and 26 guests