This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link:
Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

Little bit of oil coming out of filter cap screw

The Cub Club -- Questions and answers to all of your Cub related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
User avatar
ShawnAgne
5+ Years
5+ Years
Posts: 838
Joined: Sat May 07, 2016 5:13 pm
Zip Code: 45380
Tractors Owned: 1952 Cub w/ 184 motor (Kid)
12V with Petronix
IH 3160 Mower Deck
54 Leveling Blade
193 Plow
IH528 Trailer
Front/Rear Weights
1955 Farmall 300 (Clarence)
12V with Petronix
Woods L306 72"
1955 Farmall 100 (Thomas)
12V with Petronix
Woods L59 60"
A60 Leveling Blade
Front/Rear Weights
Circle of Safety: Y
Location: Versailles, Ohio

Little bit of oil coming out of filter cap screw

Postby ShawnAgne » Fri Oct 06, 2017 6:48 pm

While checking out if my induction tach is reading properly I noticed that I have some oil coming out of the screw that holds the filter in place. Any idea why this is happening?
Shawn Agne

SPONSOR AD

Sponsor



Sponsor
 

Eugene
Team Cub Mentor
Team Cub Mentor
Posts: 20336
Joined: Fri Jul 02, 2004 9:52 pm
Zip Code: 65051
Circle of Safety: Y
Location: Mo. Linn

Re: Little bit of oil coming out of filter cap screw

Postby Eugene » Fri Oct 06, 2017 7:14 pm

Replace the brass washer between the bolt and lid.
I have an excuse. CRS.

User avatar
Glen
10+ Years
10+ Years
Posts: 6095
Joined: Mon Mar 19, 2012 7:33 pm
Zip Code: 00000
Tractors Owned: 1956 Farmall Cub with Fast Hitch, F-11 plow, Disc, Cultivator, Cub-22 mower
Circle of Safety: Y
Location: Wa.

Re: Little bit of oil coming out of filter cap screw

Postby Glen » Fri Oct 06, 2017 7:24 pm

Hi,
You could check and see if the bolt is tight.
Below is a listing for a new copper washer at TM Tractor. A hardware store might sell them too. :)

http://www.tmtractor.com/new/en/287fp.htm

User avatar
ShawnAgne
5+ Years
5+ Years
Posts: 838
Joined: Sat May 07, 2016 5:13 pm
Zip Code: 45380
Tractors Owned: 1952 Cub w/ 184 motor (Kid)
12V with Petronix
IH 3160 Mower Deck
54 Leveling Blade
193 Plow
IH528 Trailer
Front/Rear Weights
1955 Farmall 300 (Clarence)
12V with Petronix
Woods L306 72"
1955 Farmall 100 (Thomas)
12V with Petronix
Woods L59 60"
A60 Leveling Blade
Front/Rear Weights
Circle of Safety: Y
Location: Versailles, Ohio

Re: Little bit of oil coming out of filter cap screw

Postby ShawnAgne » Fri Oct 06, 2017 7:31 pm

Thanks for mentioning this

Or I could add a brass washer between the bolt and lid :)

There isn't one, duh.....

I've had a major case of the stupids today.......... :lost:
Shawn Agne


Return to “Farmall Cub”

Who is online

Users browsing this forum: No registered users and 20 guests