This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
12 volt
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
john2189
- 10+ Years
- Posts: 1776
- Joined: Thu Oct 26, 2006 7:17 pm
- Zip Code: 44657
- Circle of Safety: Y
- Location: Minerva,Ohio
12 volt
What year did the cub go to 12 volts?
'49 Cub (Vince)
'41 allis B with Woods L59 mower
656 Wheel Horse with 42” sickle mower
C-165 Wheel Horse
Simplicity 20 HP Sunstar
Honda 48” walk behind mower
'41 allis B with Woods L59 mower
656 Wheel Horse with 42” sickle mower
C-165 Wheel Horse
Simplicity 20 HP Sunstar
Honda 48” walk behind mower
-
Barnyard
- Team Cub
- Posts: 24272
- Joined: Tue Aug 07, 2007 3:39 pm
- Zip Code: 45030
- Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
- Location: OH, New Haven (Hamilton County)
- Contact:
Re: 12 volt
1964
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.
-
Glen
- 10+ Years
- Posts: 6149
- Joined: Mon Mar 19, 2012 7:33 pm
- Zip Code: 00000
- Tractors Owned: 1956 Farmall Cub with Fast Hitch, F-11 plow, Disc, Cultivator, Cub-22 mower
- Circle of Safety: Y
- Location: Wa.
Re: 12 volt
Hi,
It was at serial number 224401, if you need the number.
It was at serial number 224401, if you need the number.
-
john2189
- 10+ Years
- Posts: 1776
- Joined: Thu Oct 26, 2006 7:17 pm
- Zip Code: 44657
- Circle of Safety: Y
- Location: Minerva,Ohio
Re: 12 volt
Thanks, my 72 has a generator when did they change to alternator? And was it the 10 si what bracket would I need to mount the 10 si so I can have it ready if the generator or regulator goes bad
'49 Cub (Vince)
'41 allis B with Woods L59 mower
656 Wheel Horse with 42” sickle mower
C-165 Wheel Horse
Simplicity 20 HP Sunstar
Honda 48” walk behind mower
'41 allis B with Woods L59 mower
656 Wheel Horse with 42” sickle mower
C-165 Wheel Horse
Simplicity 20 HP Sunstar
Honda 48” walk behind mower
-
Glen
- 10+ Years
- Posts: 6149
- Joined: Mon Mar 19, 2012 7:33 pm
- Zip Code: 00000
- Tractors Owned: 1956 Farmall Cub with Fast Hitch, F-11 plow, Disc, Cultivator, Cub-22 mower
- Circle of Safety: Y
- Location: Wa.
Re: 12 volt
Hi,
IH changed to the Delco 10 SI alternator in mid 1975 at serial number 248125, the first long stripe Cub.
IH had their own brackets, which are different than the brackets some companies sell to put an alt on a Cub.
Here are pics at TM Tractor of the upper radiator elbow, which is different, and part of the mounting.
http://www.tmtractor.com/tm-tractor/gel ... pp_001.htm
There is also a bracket at the lower side of the alt, I don't have a pic of it, except in the pic below.
Below is a pic of the IH mounting. The wiring will need changing some to use an Alt.
Other companies sell mountings to put an alt on a Cub.
IH changed to the Delco 10 SI alternator in mid 1975 at serial number 248125, the first long stripe Cub.
IH had their own brackets, which are different than the brackets some companies sell to put an alt on a Cub.
Here are pics at TM Tractor of the upper radiator elbow, which is different, and part of the mounting.
http://www.tmtractor.com/tm-tractor/gel ... pp_001.htm
There is also a bracket at the lower side of the alt, I don't have a pic of it, except in the pic below.
Below is a pic of the IH mounting. The wiring will need changing some to use an Alt.
Other companies sell mountings to put an alt on a Cub.
- Attachments
-
-
john2189
- 10+ Years
- Posts: 1776
- Joined: Thu Oct 26, 2006 7:17 pm
- Zip Code: 44657
- Circle of Safety: Y
- Location: Minerva,Ohio
Re: 12 volt
Thanks, looks like the mount the alt "upside down" Ill start looking for the water neck and brackets.
John
John
'49 Cub (Vince)
'41 allis B with Woods L59 mower
656 Wheel Horse with 42” sickle mower
C-165 Wheel Horse
Simplicity 20 HP Sunstar
Honda 48” walk behind mower
'41 allis B with Woods L59 mower
656 Wheel Horse with 42” sickle mower
C-165 Wheel Horse
Simplicity 20 HP Sunstar
Honda 48” walk behind mower
-
Slim140
- 5+ Years
- Posts: 4908
- Joined: Wed Nov 22, 2017 6:24 am
- Zip Code: 00000
- Tractors Owned: .
1970 International 140
1972 International 140
1949 John Deere A
1993 Ford 4630 W/Loader
1965 John Deere 110
1961 Cub Cadet Original - Circle of Safety: Y
Re: 12 volt
If you're not concerned about getting it back to perfectly original here's a good option. It's a simple one wire connection, nothing else. I have it on both of ours with no problems. There's several people on here running it as well. The price has came down again too!
https://www.dbelectrical.com/products/c ... 12180.html
https://www.dbelectrical.com/products/c ... 12180.html
Every home is a school, what are you teaching?
-
ShawnAgne
- 5+ Years
- Posts: 846
- Joined: Sat May 07, 2016 5:13 pm
- Zip Code: 45380
- Tractors Owned: 1952 Cub w/ 184 motor (Kid)
12V with Petronix
IH 3160 Mower Deck
54 Leveling Blade
193 Plow
IH528 Trailer
Front/Rear Weights
1955 Farmall 300 (Clarence)
12V with Petronix
Woods L306 72"
1955 Farmall 100 (Thomas)
12V with Petronix
Woods L59 60"
A60 Leveling Blade
Front/Rear Weights - Circle of Safety: Y
- Location: Versailles, Ohio
Re: 12 volt
Because I couldn't fab my own brackets I got the Steiner bracts and then had to modify them a little bit for my 10si clone on the Cub.
Shawn Agne
-
john2189
- 10+ Years
- Posts: 1776
- Joined: Thu Oct 26, 2006 7:17 pm
- Zip Code: 44657
- Circle of Safety: Y
- Location: Minerva,Ohio
Re: 12 volt
Shane Nelson wrote:If you're not concerned about getting it back to perfectly original here's a good option. It's a simple one wire connection, nothing else. I have it on both of ours with no problems. There's several people on here running it as well. The price has came down again too!
https://www.dbelectrical.com/products/c ... 12180.html
Thanks, I have no problem about not being original. I just have a few 10 si not doing anything
'49 Cub (Vince)
'41 allis B with Woods L59 mower
656 Wheel Horse with 42” sickle mower
C-165 Wheel Horse
Simplicity 20 HP Sunstar
Honda 48” walk behind mower
'41 allis B with Woods L59 mower
656 Wheel Horse with 42” sickle mower
C-165 Wheel Horse
Simplicity 20 HP Sunstar
Honda 48” walk behind mower
-
Willy
- 5+ Years
- Posts: 519
- Joined: Sun Oct 22, 2017 4:54 pm
- Zip Code: 38330
- Tractors Owned: 1951 Cub Lil Red
- Location: Dyer, TN
Re: 12 volt
It's not that difficult to convert a 10SI to one wire. I've done a few. I'm running one on my Cub, but I didn't convert that one.
Who is online
Users browsing this forum: Bill V in Md, DonMountain and 66 guests
