my 1950 cub

Farmall Cub Forum -- Questions and answers to all of your Cub related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Indy4570
Cub Star
Cub Star
Posts: 62
Joined: Tue Nov 28, 2017 2:12 am
Zip Code: 65608
Tractors Owned: 50 Farmall Cub
50 Ferguson TO20
49 Ferguson TE20
48 Ferguson TE20
late 50s AC HD6, (Buda)
JD 790 4x4 w/backhoe
Bushhog T-63 (1963)
Gilson 18HP
various other GTs
Location: Missouri Ozarks

Re: my 1950 cub

Postby Indy4570 » Mon Dec 04, 2017 7:12 pm

Stanton wrote:As far as the seat goes, if it fits your tractor, if it provides some spring/bounce to absorb a rough ride and fits your rear end, then it's a keeper. But to answer your question, no, it's not a seat IH produced for a Cub.

Keep the pics coming. :tractor:


its the only seat I have so it isn't going anywhere :P
better to have it and not need it than to need it and not have it...( YES this includes CUBS! )

User avatar
Karl Bader
Cub Star
Cub Star
Posts: 51
Joined: Mon Apr 17, 2017 12:45 pm
Zip Code: 18088
Tractors Owned: 1947 Farmall cub
1952 Farmall cub (some assembly required)
Location: Walnutport, PA

Re: my 1950 cub

Postby Karl Bader » Tue Dec 05, 2017 9:21 am

Indy4570 wrote: its the only seat I have so it isn't going anywhere :P


My recommendation would be to keep it on then! Might get a whole new view on life without it! :shock:

Indy4570
Cub Star
Cub Star
Posts: 62
Joined: Tue Nov 28, 2017 2:12 am
Zip Code: 65608
Tractors Owned: 50 Farmall Cub
50 Ferguson TO20
49 Ferguson TE20
48 Ferguson TE20
late 50s AC HD6, (Buda)
JD 790 4x4 w/backhoe
Bushhog T-63 (1963)
Gilson 18HP
various other GTs
Location: Missouri Ozarks

Re: my 1950 cub

Postby Indy4570 » Thu Dec 07, 2017 2:25 pm

in the continuing saga..this axle will never adjust again...
Attachments
DSCF3113 F.jpg
better to have it and not need it than to need it and not have it...( YES this includes CUBS! )

User avatar
Shane Nelson
501 Club
501 Club
Posts: 1664
Joined: Wed Nov 22, 2017 6:24 am
Zip Code: 27284
Tractors Owned: .
1947 Cub #1447 (Arnold)
1949 Cub (Walt)
1949 John Deere A
1972 Schramm Pneumatractor
1993 Ford 4630
1965 John Deere 110
1961 Cub Cadet Original
Circle of Safety: Y
Location: Oak Ridge, N.C.

Re: my 1950 cub

Postby Shane Nelson » Thu Dec 07, 2017 2:26 pm

Indy4570 wrote:in the continuing saga..this axle will never adjust again...

A cut off wheel on a grinder and then a flap disk that thing would be adjusting in no time and you couldn't even tell it's been welded on :D
God is good, all the time!
Circle of Safety

Indy4570
Cub Star
Cub Star
Posts: 62
Joined: Tue Nov 28, 2017 2:12 am
Zip Code: 65608
Tractors Owned: 50 Farmall Cub
50 Ferguson TO20
49 Ferguson TE20
48 Ferguson TE20
late 50s AC HD6, (Buda)
JD 790 4x4 w/backhoe
Bushhog T-63 (1963)
Gilson 18HP
various other GTs
Location: Missouri Ozarks

Re: my 1950 cub

Postby Indy4570 » Thu Dec 07, 2017 2:39 pm

I did some work to the cub yesterday, after I power washed it it refused to run, ( yup, I am that guy ) It had what was apparently a momentary off switch for a kill switch. I used a jumper wire to the coil and it ran. I removed the momentarily off switch and joined the wires and it worked with the main switch, all good....BUT The alternator belt was broken and it was running on battery power. When I replaced the alternator belt (thank you Barnyard for the youtube vid I watched on this procedure! ) the tractor was not shutting off with the main switch. I am guessing now the alternator was providing the hots, a quick bat cable removal confirmed this. I noticed a different sound coming from the alternator when the main switch was turned off. I also noticed the starter would not engage when the main switch was in the off position.. I dont recall if this was the case before, I assume it was. So a dig through the junk gave me a toggle switch I installed i place of the defunct momentarily off switch had me now able to turn the thing OFF. :{_}: The amp gauge seems to show some minimal charging going on. I reinstalled the bug eyes and will wire them today if I get to it and see if I can create more draw and have the amp meter show a bit more effort on the part of the alternator. :tractor:
better to have it and not need it than to need it and not have it...( YES this includes CUBS! )

Indy4570
Cub Star
Cub Star
Posts: 62
Joined: Tue Nov 28, 2017 2:12 am
Zip Code: 65608
Tractors Owned: 50 Farmall Cub
50 Ferguson TO20
49 Ferguson TE20
48 Ferguson TE20
late 50s AC HD6, (Buda)
JD 790 4x4 w/backhoe
Bushhog T-63 (1963)
Gilson 18HP
various other GTs
Location: Missouri Ozarks

Re: my 1950 cub

Postby Indy4570 » Thu Dec 07, 2017 2:45 pm

Shane Nelson wrote:
Indy4570 wrote:in the continuing saga..this axle will never adjust again...

A cut off wheel on a grinder and then a flap disk that thing would be adjusting in no time and you couldn't even tell it's been welded on :D


I am afraid I would find things under those welds I don't want to find! While I was once a machinist and can do a lot I do not have your welding skills Sir and am concerned I might make it worse than it is now ;) Right now I can use it and turning out the front wheels will give me enough stance for the hills around here, turning out the rears gave me a huge difference in width. I have tipped a few things over, my JD 790 more than once and a hug antique Lull forklift. I will try to refrain from such activities at my older age :P
better to have it and not need it than to need it and not have it...( YES this includes CUBS! )

Indy4570
Cub Star
Cub Star
Posts: 62
Joined: Tue Nov 28, 2017 2:12 am
Zip Code: 65608
Tractors Owned: 50 Farmall Cub
50 Ferguson TO20
49 Ferguson TE20
48 Ferguson TE20
late 50s AC HD6, (Buda)
JD 790 4x4 w/backhoe
Bushhog T-63 (1963)
Gilson 18HP
various other GTs
Location: Missouri Ozarks

Re: my 1950 cub

Postby Indy4570 » Sat Dec 09, 2017 6:09 pm

not too much done on the cub today, did wire up the bugeyes and the charging system is WORKING! Gotta love that :)
Attachments
DSCF3159 F.jpg
better to have it and not need it than to need it and not have it...( YES this includes CUBS! )

User avatar
Drfting1
Cub Star
Cub Star
Posts: 134
Joined: Wed Nov 02, 2016 7:25 pm
Zip Code: 07461
Tractors Owned: 53 Cub
Circle of Safety: Y
Location: Wantage NJ

Re: my 1950 cub

Postby Drfting1 » Sat Dec 09, 2017 6:32 pm

Awsome when things work... And please never change those headlights out... Love them! 8)

Indy4570
Cub Star
Cub Star
Posts: 62
Joined: Tue Nov 28, 2017 2:12 am
Zip Code: 65608
Tractors Owned: 50 Farmall Cub
50 Ferguson TO20
49 Ferguson TE20
48 Ferguson TE20
late 50s AC HD6, (Buda)
JD 790 4x4 w/backhoe
Bushhog T-63 (1963)
Gilson 18HP
various other GTs
Location: Missouri Ozarks

Re: my 1950 cub

Postby Indy4570 » Sat Dec 09, 2017 7:02 pm

Drfting1 wrote:Awsome when things work... And please never change those headlights out... Love them! 8)


I suppose some day if I was able to replace or repair enough things on it I might replace them with a stock sized headlight but as she is now this tractor is something to do work with. I admit I have developed a real affinity for the wee beastie. The capability of a cub rated at 9hp boggles th mind, (new methods of measuring HP not withstanding )
I am considering painting the thing OD green and stenciling a US Cub on the hood :P I tried to secure a sickle mower but the poster never responded. I think a flail mower would be awesome too but I bale hay( grass ) so a sickle mower is something I might get a lot of use out of. Honestly the best thing about this tractor is how it runs. I could not be more pleased with the engine, the bolts indicate it has been split and work has been done, how much I don't know. until it just got cold recently you could start the thing with no choke and the smallest pull on the starter rod, it just purred to life. Now it needs a lil choke to help her breath fire.

you might have noticed the belly mower "lite" , it has no skirt on it anywhere and is missing a blade I found out, I swear it had three when I brought it home :shock:
Attachments
DSCF3158 F.jpg
better to have it and not need it than to need it and not have it...( YES this includes CUBS! )

k hutchins
5+ Years
5+ Years
Posts: 189
Joined: Tue Mar 27, 2012 5:48 pm
Zip Code: 48843
Tractors Owned: 1948 Farmall Cub
193 plow
1948 snow/grading blade
Woods 59 C3
Cub 144 cultivator
Cub 22 mower
Cub 172 one row planter
Original manuals for all the above

Re: my 1950 cub

Postby k hutchins » Sat Dec 09, 2017 7:31 pm

Too bad you're so far away. I know where there is a C22 sickle mower that's ready to bolt on an go.
It's always been garage stored and just colllecting dust.
Why is there never enough time to do the job right, but always enough time to do it over. :?:

Indy4570
Cub Star
Cub Star
Posts: 62
Joined: Tue Nov 28, 2017 2:12 am
Zip Code: 65608
Tractors Owned: 50 Farmall Cub
50 Ferguson TO20
49 Ferguson TE20
48 Ferguson TE20
late 50s AC HD6, (Buda)
JD 790 4x4 w/backhoe
Bushhog T-63 (1963)
Gilson 18HP
various other GTs
Location: Missouri Ozarks

Re: my 1950 cub

Postby Indy4570 » Sat Dec 09, 2017 7:48 pm

k hutchins wrote:Too bad you're so far away. I know where there is a C22 sickle mower that's ready to bolt on an go.
It's always been garage stored and just colllecting dust.


I used to live in Lansing, who knows, might be back through there one day. maybe cub express would help
better to have it and not need it than to need it and not have it...( YES this includes CUBS! )

User avatar
Drfting1
Cub Star
Cub Star
Posts: 134
Joined: Wed Nov 02, 2016 7:25 pm
Zip Code: 07461
Tractors Owned: 53 Cub
Circle of Safety: Y
Location: Wantage NJ

Re: my 1950 cub

Postby Drfting1 » Sun Dec 10, 2017 5:50 am

Think going OD green w/stencil would be nice!... Give it cool military look... Wish you were closer, would give you mower deck that I have


  • Similar Topics
    Replies
    Views
    Last post

Return to “Farmall Cub”

Who is online

Users browsing this forum: BJM68 and 4 guests