So I’m putting together a list of some items I need.
Two of these items are the rear cultivator lift rods. From what I can see from looking at the manuals they are the same weather you are using the rear rockstar of the fast hitch.
Is this correct?
One of them item I want to add is a fast hitch so it’s easier for my son to change implements.
And if you have a fast hitch the rear rock shaft isn’t required?
Thanks.
Keith
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Rear cultivator rods with a fast hitch
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- J3 Driver
- 5+ Years
- Posts: 236
- Joined: Mon Oct 31, 2016 11:38 am
- Zip Code: 17241
- Tractors Owned: 1976 C-160 Wheelhorse
1995 JD F525
1998 JD 955 with 70A loader and 54 blade
JD 71 planter modified for use on Sleevehitch
Brinly plow, disk, and cultivator.
Son has a 1957 Cub with fast hitch, snowplow, 194 plow, disk, carryall, Mott fast hitch flail mower, and windbreaker
1942 John Deere H - Circle of Safety: Y
- tmays
- 10+ Years
- Posts: 3410
- Joined: Wed May 11, 2011 8:59 pm
- Zip Code: 39154
- Tractors Owned: 1969 Farmall Cub
1952 Cub
1942 Farmall H - Location: Raymond, MS
Re: Rear cultivator rods with a fast hitch
Make sure fast hitch has the longer pins required for the rear lift rods
Edited my response after reading Jim’s post. Learn something new every day.
Edited my response after reading Jim’s post. Learn something new every day.
Last edited by tmays on Sun Dec 03, 2017 5:21 am, edited 1 time in total.
Thomas
-
- Team Cub
- Posts: 17272
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: Rear cultivator rods with a fast hitch
The horizontal holes through the swivels at the top of the pressure rods are different sizes depending on Fast-Hitch or not. You can use the conventional one with a Fast-Hitch by slipping a machine bushing on. The Fast-Hitch sized swivel will not fit on the conventional lifting bar.
There was a restyled pressure rod for the left universal mounting frame, needed with Fast-Hitch.
There was a restyled pressure rod for the left universal mounting frame, needed with Fast-Hitch.
- Glen
- 10+ Years
- Posts: 6139
- Joined: Mon Mar 19, 2012 7:33 pm
- Zip Code: 00000
- Tractors Owned: 1956 Farmall Cub with Fast Hitch, F-11 plow, Disc, Cultivator, Cub-22 mower
- Circle of Safety: Y
- Location: Wa.
Re: Rear cultivator rods with a fast hitch
Hi,
Below are pages from the 1955 Cub owner's manual of the Fast Hitch.
You don't use the rear non Fast Hitch lift with a Fast Hitch.
The Belt Pulley Attachment they show is not needed.
http://farmallcub.com/rudi_cub/www.clea ... e%2018.jpg
http://farmallcub.com/rudi_cub/www.clea ... e%2019.jpg
1957 was about the time IH changed from the depth control lever, on the right side of the Cub, to the crank, which they used up until the end of making the Cub. I don't know if you are choosy about which one it has.
Below is the 1955 Cub owner's manual, if you don't have one. They have lots of info.
http://farmallcub.com/rudi_cub/www.clea ... index.html
The left lift rod for the Universal Mounting Frame has a different end for use with the Fast Hitch, like Jim said above. Below is a page from the Cub 144 Cultivator owner's manual showing it, in the upper pic, at numbers 3 and 4 in the pic.
http://farmallcub.com/rudi_cub/www.clea ... age-11.jpg
Below is the Cub 144 Cultivator owner's manual, if you don't have it.
http://farmallcub.com/rudi_cub/www.clea ... index.html
Below are pages from the 1955 Cub owner's manual of the Fast Hitch.
You don't use the rear non Fast Hitch lift with a Fast Hitch.
The Belt Pulley Attachment they show is not needed.
http://farmallcub.com/rudi_cub/www.clea ... e%2018.jpg
http://farmallcub.com/rudi_cub/www.clea ... e%2019.jpg
1957 was about the time IH changed from the depth control lever, on the right side of the Cub, to the crank, which they used up until the end of making the Cub. I don't know if you are choosy about which one it has.
Below is the 1955 Cub owner's manual, if you don't have one. They have lots of info.
http://farmallcub.com/rudi_cub/www.clea ... index.html
The left lift rod for the Universal Mounting Frame has a different end for use with the Fast Hitch, like Jim said above. Below is a page from the Cub 144 Cultivator owner's manual showing it, in the upper pic, at numbers 3 and 4 in the pic.
http://farmallcub.com/rudi_cub/www.clea ... age-11.jpg
Below is the Cub 144 Cultivator owner's manual, if you don't have it.
http://farmallcub.com/rudi_cub/www.clea ... index.html
Who is online
Users browsing this forum: No registered users and 54 guests