New Member from NW Oklahoma

Post your introduction and "get to know me" information in this forum.

Moderator: Team Cub

User avatar
HandyProfessor
Posts: 18
Joined: Mon May 25, 2020 2:12 pm
Zip Code: 73843
Tractors Owned: 1948 Farmall M Wide Front
1953 Case DC3 Wide Front
1961 Wheel Horse 701 Custom 2 Seater
1963 Wheel Horse 753
1967 Wheel Horse 1277
1970 Wheel Horse Commando V8
1979 Wheel Horse C141
1981 Wheel Horse C125
Circle of Safety: Y
Location: OK Gage

New Member from NW Oklahoma

Postby HandyProfessor » Mon May 25, 2020 6:37 pm

Hello All,

My name is Bryce, but everyone around here knows me as the Professor. Been into old iron most all my life. was driving my grandpa's D15 Allis Chalmers when I was around 10, and been hooked ever since. Always been partial to red machines, started out collecting Wheel Horse garden tractors, but have always had the desire to own a Farmall. Bought my first farm tractor a few months ago from a very dear friend of mine who is a very avid collector of IH and John Deere tractors. However it wasn't a Farmall, but rather a 1953 Case DC3 with the adjustable wide front. Finally scratched the Farmall itch a few weeks ago when I purchased a 1948 M with factory wide front.
Circle of Safety

User avatar
Stanton
Team Cub
Team Cub
Posts: 6419
Joined: Mon Jun 22, 2009 6:56 am
Zip Code: 64070
Tractors Owned: 1942 Farmall AV, serial #87025
1947 Farmall Circle Cub, serial #2116
1948 Farmall Cub, serial #46066
Circle of Safety: Y
Location: Lone Jack, MO

Re: New Member from NW Oklahoma

Postby Stanton » Mon May 25, 2020 6:50 pm

Welcome to the forum.

Take some time and read through a few threads to acquaint yourself with the Forum:

Don't know if you have any of the manuals to your tractor, but after your 2nd post on the Forum, you'll have access to the all the PDF Manuals on this site. There’s a few ways to do that:
  • From a desktop or laptop, go to "Quick Links" in the upper left corner of your screen. Hit that and a pull-down appears where you'll find "PDF Manuals".
  • You can also go to “Cub Info” in the upper toolbar, then hit “Rudi’s Manuals”. From there, you can access a variety of information.
  • If you're using a phone, go to the "Links Directory" (second category down the main page). Once in "Links Directory" , scroll down to the second section "Tractor Parts & Manuals" and you'll find them there.

We’d encourage you to take the Safety Test located in the Safety Forum: http://farmallcub.com/phpBB2/viewtopic.php?f=33&t=68084

Take some pictures of your tractor and post them, we’d like to see them.

Remember:
• When you have a specific question, start a new thread in the appropriate sub-forum.
• Before posting, use the Preview button before hitting Submit--it'll show you exactly what your post will look like, including pictures.
• When adding your comments to a thread, be sure to look at the date of the last poster. If it’s more than a 6 months old, the posters are probably not going to see it. Consider starting a new thread.

Glad you joined us.

:tractor:
Stanton
Image Circle of Safety

Bob McCarty
Team Cub
Team Cub
Posts: 10132
Joined: Tue May 25, 2004 8:02 pm
Zip Code: 80501
Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
Circle of Safety: Y
Location: CO, Longmont

Re: New Member from NW Oklahoma

Postby Bob McCarty » Mon May 25, 2020 9:19 pm

Bryce, Welcome to the Forum.
"We don't need to think more,
we need to think differently."
-Albert Einstein

User avatar
Mike in Louisiana
10+ Years
10+ Years
Posts: 6887
Joined: Tue Feb 15, 2005 10:10 am
Zip Code: 71023
Circle of Safety: Y
Location: LA, Doyline

Re: New Member from NW Oklahoma

Postby Mike in Louisiana » Tue May 26, 2020 9:59 am

Professor, welcome to the forum.
1975 cub (LouAnn) serial # 245946, 1941 John Deere Model H

Good judgment comes from experience,
and a lot of that comes from bad judgment. Will Rogers

muleboss
10+ Years
10+ Years
Posts: 999
Joined: Sat Dec 10, 2005 4:31 pm
Zip Code: 66839
Circle of Safety: Y
Location: KS. Burlington

Re: New Member from NW Oklahoma

Postby muleboss » Tue May 26, 2020 4:57 pm

Welcome to the form. Since you are just west of Woodward and into wheel horses wondering if you might know of a Kenny Martin. Very well versed man on small and antique engines.

User avatar
HandyProfessor
Posts: 18
Joined: Mon May 25, 2020 2:12 pm
Zip Code: 73843
Tractors Owned: 1948 Farmall M Wide Front
1953 Case DC3 Wide Front
1961 Wheel Horse 701 Custom 2 Seater
1963 Wheel Horse 753
1967 Wheel Horse 1277
1970 Wheel Horse Commando V8
1979 Wheel Horse C141
1981 Wheel Horse C125
Circle of Safety: Y
Location: OK Gage

Re: New Member from NW Oklahoma

Postby HandyProfessor » Tue May 26, 2020 7:30 pm

Thank you everyone for the welcome


muleboss wrote:Welcome to the form. Since you are just west of Woodward and into wheel horses wondering if you might know of a Kenny Martin. Very well versed man on small and antique engines.


The name sounds familiar, but can't place him anywhere
Circle of Safety

Barn1018
Posts: 33
Joined: Fri Aug 12, 2016 9:55 pm
Zip Code: 73801
Tractors Owned: 1958 F cub, 1955 Farmall 100, 1968 f cUB
Circle of Safety: Y

Re: New Member from NW Oklahoma

Postby Barn1018 » Tue Jun 30, 2020 2:11 pm

Hey Bryce, glad to see a new member from this area. I'm in Woodward. Cub members are a rare breed in this part of the world. I see you are toeing all around actual cub ownership with all the different tractor models you have. If you ever get one you will be glad you did. I look forward to meeting you some day. By the way, Muleboss, Kenny Martin celebrated his 90th birthday last week and says he is gonna retire from small engine repair. He is an amazing man


Return to “Introduce Yourself”

Who is online

Users browsing this forum: No registered users and 1 guest