This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Greetings from Australia!
-
- 5+ Years
- Posts: 19
- Joined: Sun Nov 25, 2018 10:52 pm
- Zip Code: 3444
Greetings from Australia!
Hi, Jason Tusa here, from Kyneton, Victoria, Australia. I have recently purchased a '49 Cub, not going at the moment but looks to be in good repair. Just finishing off converting to 12v (after following a you-tube series by Just Tinkering, thank you Sir), so almost there, though have had some pain freeing up the governor leaver/arm (and in turn now need to replace the governor thrust bearing as it came apart whilst dismantling, basically due to my ineptitude). All good fun nonetheless, and I'm looking forward to completing the restoration and doing nothing more but driving the rig around on our 6 acre plot. cheers, Jason.
- T-Mo
- 5+ Years
- Posts: 2015
- Joined: Tue May 16, 2017 9:25 am
- Zip Code: 63628
- Tractors Owned: '40 H
'44 B
'47 Cub
'49 C
54A Blade
42 Woods Mower
Henderson Loader
Cultivators
No. 8 Little Genius 2-12 Plow
IH Running Gear - Circle of Safety: Y
- Location: Bonne Terre, Mo
Re: Greetings from Australia!
Jason, welcome to the forum. If you have two posts under your belt (you're half way there with 1 post), you can access and download manuals from here. Just click on the Quick Links on the upper left, and scroll down to the PDF Manual, second from the bottom of the list. That will take you to the manual section where you can then download the manuals that is available for downloading.
Again, welcome to the site.
Again, welcome to the site.
- Dale Finch
- 10+ Years
- Posts: 6684
- Joined: Tue Apr 27, 2010 11:34 am
- Zip Code: 27517
- Tractors Owned: '51 Cub #140966 "Bruno" with Woods 59 mower
'55 Cub #187541 "Betty" with Fast Hitch
'55 Cub #190482 "Ben" with Woods 42 mower
'55 Cub #191739 "Bertha" with Woods 42 mower
'56 Cub #194370 "Boris" with Mott Flail mower - Circle of Safety: Y
- Location: NC, Chapel Hill
Re: Greetings from Australia!
Welcome! Learn how to post photos (they need to be reduced in size)...we LOVE photos!!
And no matter how many photos you take during disassembly, you'll be missing the very one you need to figure out how it goes back together! So keep on clicking!
And no matter how many photos you take during disassembly, you'll be missing the very one you need to figure out how it goes back together! So keep on clicking!
-
- Team Cub
- Posts: 11859
- Joined: Tue May 25, 2004 8:02 pm
- Zip Code: 80501
- Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
- Circle of Safety: Y
- Location: CO, Longmont
Re: Greetings from Australia!
Welcome to the Forum. Let us know if you need any help.
"We don't need to think more,
we need to think differently."
-Albert Einstein
we need to think differently."
-Albert Einstein
- Stanton
- Cub Pro
- Posts: 7760
- Joined: Mon Jun 22, 2009 6:56 am
- Zip Code: 64070
- Tractors Owned: 1942 Farmall AV, serial #87025
1947 Farmall Circle Cub, serial #2116
1948 Farmall Cub, serial #46066 - Circle of Safety: Y
- Location: Lone Jack, MO
Re: Greetings from Australia!
Welcome, Jason!
Take some time and read through a few threads to acquaint yourself with the Forum:
After your 2nd post on the Forum, you'll have access to the all the free PDF Manuals. They are located via "Quick Links" in the upper left corner of your screen. Hit that and a pull-down appears where you'll find "PDF Manuals". Through that link, you'll be able to download an Owner's Manual (very strongly recommended) and any service manuals that interest you. You'll be able to familiarize yourself with your new-to-you Cub more quickly. Implement Manuals are also available.
Might also enjoy reading through this thread: What to do with a Cub you just brought home
Take some pictures of your tractor and post them. We’d like to see it.
Glad you joined us.
Take some time and read through a few threads to acquaint yourself with the Forum:
- Welcome Wagon
- How to Upload Pictures to a Post
- Forum Picture Posting And Other Interesting Things You Can Do
- Using the Forum
After your 2nd post on the Forum, you'll have access to the all the free PDF Manuals. They are located via "Quick Links" in the upper left corner of your screen. Hit that and a pull-down appears where you'll find "PDF Manuals". Through that link, you'll be able to download an Owner's Manual (very strongly recommended) and any service manuals that interest you. You'll be able to familiarize yourself with your new-to-you Cub more quickly. Implement Manuals are also available.
Might also enjoy reading through this thread: What to do with a Cub you just brought home
Take some pictures of your tractor and post them. We’d like to see it.
Glad you joined us.
- Mike in Louisiana
- 10+ Years
- Posts: 7831
- Joined: Tue Feb 15, 2005 10:10 am
- Zip Code: 71023
- Circle of Safety: Y
- Location: LA, Doyline
Re: Greetings from Australia!
Welcome to the forum
1975 cub (LouAnn) serial # 245946, 1941 John Deere Model H
Good judgment comes from experience,
and a lot of that comes from bad judgment. Will Rogers
Good judgment comes from experience,
and a lot of that comes from bad judgment. Will Rogers
-
- 5+ Years
- Posts: 19
- Joined: Sun Nov 25, 2018 10:52 pm
- Zip Code: 3444
Re: Greetings from Australia!
Thanks all for the welcoming comments and 'pre-reading' - I'll be creating a second post very soon, as I can't get my cub going..Suspect it's timing related as had to completely disassemble the distributor (water ingress), and the governor arm was seized so had to be removed (and in the proces the thrust bearing fell apart in my hands), so I'm pretty sure the timing in all places it out of whack, non-magneto ignition system btw). cheers, jason.
- Stanton
- Cub Pro
- Posts: 7760
- Joined: Mon Jun 22, 2009 6:56 am
- Zip Code: 64070
- Tractors Owned: 1942 Farmall AV, serial #87025
1947 Farmall Circle Cub, serial #2116
1948 Farmall Cub, serial #46066 - Circle of Safety: Y
- Location: Lone Jack, MO
Re: Greetings from Australia!
jastusa wrote:Thanks all for the welcoming comments and 'pre-reading' - I'll be creating a second post very soon, as I can't get my cub going..Suspect it's timing related as had to completely disassemble the distributor (water ingress), and the governor arm was seized so had to be removed (and in the proces the thrust bearing fell apart in my hands), so I'm pretty sure the timing in all places it out of whack, non-magneto ignition system btw). cheers, jason.
By the "Posts" counter below your name (on the right), you've already got 3 posts, so you won't have any limitations to accessing and downloading the PDF manuals.
- Dusty B
- 10+ Years
- Posts: 1880
- Joined: Wed May 23, 2007 7:35 am
- Zip Code: 61736
- Tractors Owned: '45 SC Case
- Circle of Safety: Y
- Location: IL, Downs
- Contact:
Re: Greetings from Australia!
G’day mate! Welcome to the forum Australia is my second home spent a year traveling the entire continent in the early 90s still have good friends in Melbourne and Brisbane area ! Wife and I have been back four times hope to get back one more time at least . There is another forum member up in the Echuca area. This is a great group to provide you with answers to any of your questions ! Know that the Cubs are pricey compared to here in the USA but they are neat little tractors and really easy to work on! All of us love pictures of other members tractors and do not hesitate to ask questions. Dusty B
Grandpa's '41 B
'56,,'57,'59, Cu'b
'45 C
'55 Case S
Dad's DB garden tractor
'48 DeSoto
'31 "A Coup
'79 Lincoln TC
God looks out for those of us who don't know how to look out for ourselves!
'56,,'57,'59, Cu'b
'45 C
'55 Case S
Dad's DB garden tractor
'48 DeSoto
'31 "A Coup
'79 Lincoln TC
God looks out for those of us who don't know how to look out for ourselves!
-
- 5+ Years
- Posts: 19
- Joined: Sun Nov 25, 2018 10:52 pm
- Zip Code: 3444
Re: Greetings from Australia!
Thanks T-mo, Dale, Bob, Stanton, Mike, Dusty.B for the warm welcome. Admittedly I had stalled with the work on my '49 Cub, life got in the way, along with winter, but we are almost over that hump down here in Australia, having just entered spring, so I'm back working on the Cub. I have re-wired fully now to 12v, it has a new Carby, Governor sorted out (along with timing, also using the cork and balloon trick to find TDC!) and distributor has been completely rebuilt (I ordered a stack of parts from TM Tractors in the US over winter, so almost there).
If I can't get it going this weekend, I'll be back on the forum next week. Will definitely post some pics soon. cheers, jason
oh, Dusty.B: nice to hear someone is familiar with my locality, and yup, the Cub is a little dearer in Oz, worth it though!
If I can't get it going this weekend, I'll be back on the forum next week. Will definitely post some pics soon. cheers, jason
oh, Dusty.B: nice to hear someone is familiar with my locality, and yup, the Cub is a little dearer in Oz, worth it though!
- ricky racer
- 10+ Years
- Posts: 6337
- Joined: Wed Sep 12, 2007 8:40 pm
- Zip Code: 49120
- Circle of Safety: Y
- Location: Niles / Buchanan, Michigan
Re: Greetings from Australia!
Welcome aboard and remember to prime the oil pump!!
1929 Farmall Regular
1935 John Deere B
1937 John Deere A
1941 John Deere H
1952 John Deere B
1953 Farmall Cub
1935 John Deere B
1937 John Deere A
1941 John Deere H
1952 John Deere B
1953 Farmall Cub
-
- 5+ Years
- Posts: 19
- Joined: Sun Nov 25, 2018 10:52 pm
- Zip Code: 3444
Re: Greetings from Australia!
Noted, thanks Ricky!
Return to “Introduce Yourself”
Who is online
Users browsing this forum: No registered users and 8 guests