This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

New to me loboy

Post your introduction and "get to know me" information in this forum.
Post Reply
j p smith
5+ Years
5+ Years
Posts: 4
Joined: Tue Mar 05, 2019 1:30 pm
Zip Code: 85307

New to me loboy

Postby j p smith » Tue Mar 05, 2019 1:50 pm

Hey to all. Thanks, this looks like a great place. i got a 1963 loboy from a club member i was helping sell her husbands small engines and old mowers. Looking forward to exploring. I will post a couple of pictures later
Top

SPONSOR AD

Sponsor

Sponsor
 
Top
Bob McCarty
Team Cub
Team Cub
Posts: 11854
Joined: Tue May 25, 2004 8:02 pm
Zip Code: 80501
Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
Circle of Safety: Y
Location: CO, Longmont

Re: New to me loboy

Postby Bob McCarty » Tue Mar 05, 2019 7:56 pm

Welcome to the Forum. Let us know if we can be of any help.
"We don't need to think more,
we need to think differently."
-Albert Einstein
Top
User avatar
Mike in Louisiana
10+ Years
10+ Years
Posts: 7827
Joined: Tue Feb 15, 2005 10:10 am
Zip Code: 71023
Circle of Safety: Y
Location: LA, Doyline

Re: New to me loboy

Postby Mike in Louisiana » Wed Mar 06, 2019 10:48 am

Welcome to the forum
1975 cub (LouAnn) serial # 245946, 1941 John Deere Model H

Good judgment comes from experience,
and a lot of that comes from bad judgment. Will Rogers
Top
j p smith
5+ Years
5+ Years
Posts: 4
Joined: Tue Mar 05, 2019 1:30 pm
Zip Code: 85307

Re: New to me loboy

Postby j p smith » Thu Mar 14, 2019 4:49 pm

Thanks for the welcome
Top
j p smith
5+ Years
5+ Years
Posts: 4
Joined: Tue Mar 05, 2019 1:30 pm
Zip Code: 85307

New to me loboy pics

Postby j p smith » Thu Mar 14, 2019 5:07 pm

Here are a few pictures of our 1963 Cub Loboy. The front wheels have an inner and outer weight, was this common? Thanks


lb 4.jpg
lb 3.jpg
lb 1.jpg
lb 2.jpg
Top
Bob McCarty
Team Cub
Team Cub
Posts: 11854
Joined: Tue May 25, 2004 8:02 pm
Zip Code: 80501
Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
Circle of Safety: Y
Location: CO, Longmont

Re: New to me loboy

Postby Bob McCarty » Thu Mar 14, 2019 5:32 pm

The inner weights add about 40 lbs, per side. Fairly rare and worth $4-500 a pair. If you don't need the front end weight to counter an implement on the back, you could probably take them off.
"We don't need to think more,
we need to think differently."
-Albert Einstein
Top
User avatar
Indy4570
5+ Years
5+ Years
Posts: 961
Joined: Tue Nov 28, 2017 2:12 am
Zip Code: 65608
Tractors Owned: 49 F cub, donor
50 Farmall Cub bugeyes(dead)
55 Farmall Cub Clementine
55 International loboy
62 140 Industrial The Beast
50s Allis Chalmers B
50 Ferguson TO20 Huppster
49 Ferguson TE20 Fergie
JD 790 4x4 w/backhoe
hinomoto diesel 4x4, early to mid 80s 20HP
73 Pasquali 4x4 diesel 33HP
74 Toro golf course tractor
Gilson 18HP
Circle of Safety: Y
Location: Missouri Ozarks

Re: New to me loboy

Postby Indy4570 » Thu Mar 14, 2019 5:54 pm

looks mighty fine to me! love the front weights, and also loving the buzzsaw in front of it! :{_}:
Circle of Safety
better to have it and not need it than to need it and not have it...( YES this includes CUBS! )
Top
Bob McCarty
Team Cub
Team Cub
Posts: 11854
Joined: Tue May 25, 2004 8:02 pm
Zip Code: 80501
Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
Circle of Safety: Y
Location: CO, Longmont

Re: New to me loboy

Postby Bob McCarty » Thu Mar 14, 2019 6:19 pm

You might check to see if the piece of hood that was cut out is still around....
"We don't need to think more,
we need to think differently."
-Albert Einstein
Top
j p smith
5+ Years
5+ Years
Posts: 4
Joined: Tue Mar 05, 2019 1:30 pm
Zip Code: 85307

Re: New to me loboy

Postby j p smith » Fri Mar 15, 2019 3:28 pm

Hey Bob. Sadly no the cut out piece was not around and both sides are cut out
Top
User avatar
Dale Finch
10+ Years
10+ Years
Posts: 6677
Joined: Tue Apr 27, 2010 11:34 am
Zip Code: 27517
Tractors Owned: '51 Cub #140966 "Bruno" with Woods 59 mower
'55 Cub #187541 "Betty" with Fast Hitch
'55 Cub #190482 "Ben" with Woods 42 mower
'55 Cub #191739 "Bertha" with Woods 42 mower
'56 Cub #194370 "Boris" with Mott Flail mower
Circle of Safety: Y
Location: NC, Chapel Hill

Re: New to me loboy

Postby Dale Finch » Fri Mar 15, 2019 3:35 pm

j p smith wrote:Hey Bob. Sadly no the cut out piece was not around and both sides are cut out

Maybe the square nose hood here would work, rather than trying to repair yours...
http://farmallcub.com/phpBB2/viewtopic.php?f=223&t=103557
Dale Finch
Image
Circle of Safety
Top
Post Reply

Return to “Introduce Yourself”

Who is online

Users browsing this forum: No registered users and 6 guests

      
cron