Howdy

[Zsk7687]

New here from NC. Been lurking and learning for a while, finally decided to join the community. Yall have been a big help so far.

Bought my first cub ('53) a few months ago. Sorted out the issues it had thanks to my buddy and this site. It went so smoothly that I decided to buy a 1950 model with a seized engine to have more of a learning opportunity Looking forward to learning more and more from yall

[Dale Finch]

WELCOME! From a fellow NC-er!!

[Bob McCarty]

Welcome to the forum.

[Pap]

Welcome to the forum Zsk.
Good luck with your project and Enjoy Your Ride.

[Bill Hudson]

Welcome. Enjoy the ride.

Bill

[Stanton]

Welcome to the Forum! Your second Cub puts you into the MCC (Multiple Cub Club).

Take some time and read through a few threads to acquaint yourself with the Forum:

• Welcome Wagon
• How to Upload Pictures to a Post
• Forum Picture Posting And Other Interesting Things You Can Do
• Using the Forum

After you’ve logged your 2nd post on the Forum, you'll have access to the all the PDF Manuals on this site. There’s a few ways to do that:

• From a desktop or laptop, go to "Quick Links" in the upper left corner of your screen. Hit that and a pull-down appears where you'll find "PDF Manuals".
• You can also go to “Cub Info” in the upper toolbar, then hit “Rudi’s Manuals”. From there, you can access a variety of information.
• If you're using a phone, go to the "Links Directory" (second category down the main page). Once in "Links Directory" , scroll down to the second section "Tractor Parts & Manuals" and you'll find them there.

You'll be able to download an Owner's Manual (very strongly recommended) and any service manuals that interest you. Implement Manuals are also available.

There are a lot of good threads dealing with Cub repair and maintenance in the How To Forum. Located here: http://farmallcub.com/phpBB2/viewforum.php?f=11

We’d encourage you to take the Safety Test located in the Safety Forum: http://farmallcub.com/phpBB2/viewtopic.php?f=33&t=68084

Take some pictures of your tractors and post them, we’d like to see them.

Remember:

• Pictures are limited to 500 KB file size. Use an image reducer app or program to downsize pics.
• When you have a specific question, start a new thread in the appropriate sub-forum.
• Before posting, use the Preview button before hitting Submit--it'll show you exactly what your post will look like, including pictures.
• When adding your comments to a thread, be sure to look at the date of the last poster. If it’s more than a 6 months old, the posters are probably not going to see it. Consider starting a new thread.

Glad you joined us.

[Mike in Louisiana]

Welcome to the forum.

[Tired_Iron]

Welcome to the Forum!