Post your introduction and "get to know me" information in this forum.
Moderator: Team Cub
8 posts • Page 1 of 1
Just bought a 59 Loy-Boy to do some work around here. It has a front-end loader with a Mott Frail mower on the back. Even have the sharpener. Sure could use a plow and disk, or that sweet looking Howard Rotovator I saw on A.T.I.S...Not sure what would fit the tractor. Cub L-F194 Moldboard Plow? I'm here to learn.
Rev. Charley Florek aka Kerolf
Welcome to the forum. Enjoy the ride. This is a great place populated with lots of fine people. Just confirmed my suspicion, Litchfield is close enough for a MiniFest. Several folks close enough to get together to help. Just say the word and I know you will get any help you need.
"The probability of life originating from accident is comparable to the probability of the unabridged dictionary resulting from an explosion in a printing shop." Edwin Conklin, biologist
Welcome to the forum. Spend some time looking around the forum and you will find a wealth of information here!
Best of luck with your cub,
Charley, welcome to the forum. Take Bill up on his offer for a minifest, you'll be glad you did. Also, mark your calendar for May 21 -22 so you can attend the Barnyard Bash in the Cincinnati area. You will not only meet many of the forum members there but also learn much about your Cub and what it can do. Check out www.barnyardbash.com for more info.
Look forward to meeting you at a fest sme time.
Sea salt is healthier only because it gets stuck in the holes of the shaker and you can't actually put it on your food.
Barnyard Bash CubFest May 30th - May 31st, 2014
Click here for info.
Welcome to the forum. I am sure you will enjoy it here.
1975 cub (LouAnn) serial # 245946, 1941 John Deere Model H
Good judgment comes from experience,
and a lot of that comes from bad judgment. Will Rogers
Congrats on acquiring the 59 Loy-Boy. Finding one with aa front-end loader and a Mott Flail mower is quite a feat You will find much of what you need to understand your new Cub and the equipment that came with it in the links below.
The Cub LF-194 should be relatively easy find, but the Rotovator -- lots of luck and a huge amount of cash for the Rotovator/Speed Reducer/Hub City Gear box.. and yup, it will be a huge amount of cash for those three items... they are difficult to find and pretty pricey.
8 posts • Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest