Page 1 of 1
Hello from Tuscaloosa Alabama
Posted: Sun May 02, 2010 3:06 pm
by 1948CUB
I have a 1948 cub that I restored five years ago. I got a lot of pieces parts with the tractor and have
just started to attach the planters and associated parts. I will need some help ( I'm sure) about the correct
way to mount everything. It is nice to see a lot of other folks attached to their tractors the way I am.
Re: Hello from Tuscaloosa Alabama
Posted: Sun May 02, 2010 3:20 pm
by Bezirk
Welcome aboard ! There are many knowledgable ( and very nice ) people on this forum and I'm sure your questions will be answered in short order.
Berlin
Re: Hello from Tuscaloosa Alabama
Posted: Sun May 02, 2010 3:20 pm
by Barnyard
Welcome to the forum. You'll find all the help you need right here.
I notice your Cub is a 1948. Check out this site about a different dash that was used on some 1948's and let us know where your's falls in place.
http://www.savethecub.com/dash.htm. You could help us zero in on what the serial range is. Thanks
Re: Hello from Tuscaloosa Alabama
Posted: Sun May 02, 2010 8:40 pm
by Rudi
You will find many of the Cub Implement Owner's Manuals on the server at the Manual link above as well as in the text above. Lots of informative reading -- just follow the links. Oh, and
- we like em a lot
Re: Hello from Tuscaloosa Alabama
Posted: Sun May 02, 2010 10:49 pm
by dirtyred
hello from south ga
Re: Hello from Tuscaloosa Alabama
Posted: Mon May 03, 2010 6:37 am
by johnny j
Welcome to the forum
Re: Hello from Tuscaloosa Alabama
Posted: Mon May 03, 2010 9:11 am
by dgrapes59
Welcome to the forum!
Best of luck getting the planter attached and set up,
Re: Hello from Tuscaloosa Alabama
Posted: Wed May 05, 2010 9:28 am
by Mike in Louisiana
Welcome to the forum.