Page 1 of 1

Hello Everyone

Posted: Fri Sep 17, 2010 9:01 am
by salamonius
I am a first time cub owner from southern Indiana. We recently purchased our cub from a man selling it down the road from us. Both rear tires were shot. The lower radiator housing was busted. We bought it for 500 dollars and the guy drove it off the trailer. In the process of repairing the lower housing I found the head was cracked as well....I have the head replaced and hopefully sometime soon will get her running....

Re: Hello Everyone

Posted: Fri Sep 17, 2010 9:10 am
by Bob McCarty
Welcome to the Forum. You'll find a lot of Cub lovers here who can help you if you have questions or problems. Enjoy your Cub.

Bob

Re: Hello Everyone

Posted: Fri Sep 17, 2010 3:59 pm
by Rudi
Congrats :applause: on getting your very first Cub :D You will find that you may be hard pressed to limit it to just one Cub as the MCC addiction takes hold. Even with the few problems your seems to have, I am sure that all will work out nicely :!:

Image to Farmallcub.com :big smile: Forum Family. And you have come to the right place for all things Cub related. If you click on the Site Rules, Regulations, & Important Information, it will point you to :arrow: the Welcome Wagon wherein you will find links to many useful sites and topics. One of which is the Cub Manual Server. Enjoy!.

Re: Hello Everyone

Posted: Fri Sep 17, 2010 9:11 pm
by salamonius
Looks like I am going to have to do a LOT more to this beast than I had originally thought. I got her running no smoke started without using the choke.....I thought great .....then I heard THE noise.....at first I thought it might be a valve or the oil pump had lost it's prime......as if i could get that lucky....she has 2 spun rod bearings and some nice grooves in the crank....as well as some wear on the piston skirts....I will be splitting her this weekend and sending the block and crank to the machine shop. I am curious though, i have rebuilt more engines than i care to remember...but the rod bearings that were in this cub were sticking up past the rod caps nearly a 1/16th of an inch.....I am new to the farmall world but to me that isn't normal...I am afraid someone had replaced the rod bearings with the wrong ones.....hope it didn't hurt her too much... :? And thanks you guys for the warm welcome.... :D

Re: Hello Everyone

Posted: Sat Sep 18, 2010 4:39 am
by johnny j
Welcome to the forum :)

Re: Hello Everyone

Posted: Sat Sep 18, 2010 7:43 am
by John(videodoc)
Welcome aboard. Be sure to attend a cubfest near you. CI fest is this weekend. Docfest will be coming up in April. check my signature line. Go to the announcements page and see all the fests that are going on.

Re: Hello Everyone

Posted: Sat Sep 18, 2010 8:21 am
by Mike in Louisiana
salamonius,
Welcome to the wonderful world of Cubs. Be sure to check out the sponsors at the bottom of the page. Ralph's cubs is only 94 miles from you and is a great place to get used parts.