Hello I am new

[Fred the frenchy]

Hello everybody ,
my name is Fred .I am french. My grandfaher gave me a Farmall Cub for 1951. I'd like to restore it, that's why I'm trying to find spares catalogues and technical documents about this tractor. My tractor is equipped whith an USA engine, a mower and ploughs. Thank you very much for these informations.
Fred

[Bob McCarty]

Fred, Welcome to the best tractor Forum on the internet. You'll find lots of friendly and knowledgeable Cub owners here. The three manuals you'll want to get are the Owner's, Service, and Parts manuals. If you click on the "manuals" link in the above toolbar, you'll find them there. If you want to purchase them, TM Tractor (sponsor with link at the bottom of the page) or Binder Books on the internet are good sources. The CBoK (Cub Book of Knowledge) in the toolbar has lots of helpful info too. As questions arise, feel free to ask away.

Bob

[Fred the frenchy]

Thank you for these helpfull info ,I will try .

[johnny j]

Welcome to the Forum

[Bezirk]

Welcome aboard, you are at the right place to get information for the Cub.
Berlin

[Rudi]

Fred:

Good day Congrats on receiving your Grandfather's Cub. Having a multi-generational family item makes it the much more special. All of the information you will need can be found by following the links below. Enjoy restoring your Cub.

to Farmallcub.com Forum Family. And you have come to the right place for all things Cub related. If you click on the Site Rules, Regulations, & Important Information, it will point you to the Welcome Wagon wherein you will find links to many useful sites and topics. One of which is the Cub Manual Server. Enjoy!.

[Mike in Louisiana]

Hello Fred and welcone from Louisiana. This is a great site for cub info and anything else in the off topic forum.

[Dusty B]

Welcome Fred to one of the most knowledgeable & helpful forums! You can access just about any topic and have any question answered by people who have been there, done that!!! Good luck on your project! Dusty B