Page 1 of 1
New 1947/48 cub owner
Posted: Sun Apr 03, 2011 6:25 pm
by todd581
Hello all. The information you provide on the site is terrific. I am the new owner of a 1947/48 cub. locater in Maine.
Re: New 1947/48 cub owner
Posted: Sun Apr 03, 2011 6:32 pm
by Don McCombs
Another Mainah. Welcome.
Re: New 1947/48 cub owner
Posted: Sun Apr 03, 2011 6:39 pm
by Barnyard
Todd, welcome to the site! So tell us, is it a mix between a 47 and a 48 or what? Just wondered why you call it that.
Re: New 1947/48 cub owner
Posted: Sun Apr 03, 2011 8:10 pm
by John(videodoc)
Welcome aboard
Re: New 1947/48 cub owner
Posted: Sun Apr 03, 2011 8:43 pm
by todd581
I call it a 1947/48 as the serial number plate is not on the tractor. I casting date for the engine 12/16/47 and the other castings are early 1948.
Wish I new the serial number but nothing I can do about that issue.
Re: New 1947/48 cub owner
Posted: Sun Apr 03, 2011 9:33 pm
by Rudi
Todd:
G'day and congrats on acquiring the 47/48 Cub
Close to Kittery..... shopping destination for a lot of fulks up here
Do follow the links below. Tons of info.
Re: New 1947/48 cub owner
Posted: Sun Apr 03, 2011 9:41 pm
by Tezell
Good luck with the Cub and welcome to the forum.
Re: New 1947/48 cub owner
Posted: Mon Apr 04, 2011 8:30 am
by Mike in Louisiana
Todd, Welcome to the forum. When castings were made they had to sit for a while and cure, so yours is probably a 1948.
Re: New 1947/48 cub owner
Posted: Mon Apr 04, 2011 1:02 pm
by todd581
Thanks Mike. Looks like I have a 48. Appreciate all the welcomes.