Page 1 of 1

Hi from east central MN, BigUgly here just joined.

Posted: Mon Jul 23, 2012 6:47 pm
by BigUgly
I do not own any Farmals at present. The closest I have been is a Case 1490 with a Allied loader which I sold a couple years ago. I have presently a 47 Ford 2N, 44 &
45 JD Bs, 48 JD G, 50 WD Allis Chalmers.
I recently purchased a Wisconsin VP4D V4 engine that has a bout 40 hours on it and it came with a twin disc attached clutch. That is how I found this site searching for info.
My intention is to put that engine in my old Bobcat 600 Skidsteer.
Sorry way too much info for first post, this is from my iPhone a challenge for this old fart.
Have a Good Evening all and I will be checking back for more info if OK with you guys.

Re: Hi from east central MN, BigUgly here just joined.

Posted: Mon Jul 23, 2012 7:01 pm
by Boss Hog
Welcome to the forum, you dont know what you are missing not have a Farmall or International though :D , you would have much more time for the PC

Boss

Re: Hi from east central MN, BigUgly here just joined.

Posted: Mon Jul 23, 2012 9:18 pm
by Rudi
Welcome to the Forums. Hopefully if you hang around enough, you might get a hankerin for some IH Red maybe even in Cub clothes.

Re: Hi from east central MN, BigUgly here just joined.

Posted: Tue Jul 24, 2012 7:02 pm
by BigUgly
Hi Boss:
I would suppose the Farmall owners hang out with the Maytag guys.
I prefer to get involved in the mechanical part especially; relaxes me.
BigUgly. "TIC"

Re: Hi from east central MN, BigUgly here just joined.

Posted: Sun Jul 29, 2012 8:10 am
by Mike in Louisiana
Welcome to the forum.