Page 1 of 1

Greetings from Altamont, NY

Posted: Sun Mar 17, 2013 8:26 am
by PVF1799
Hi to all - last weekend we started restoring our 1948 Farmall Cub - Serial #21005. Dad, purchased this tractor in the late 1960's. We have the cultivator, planter, cycle bar mower, land plow and snow plow. We've got the ol'girl pretty much stripped down to just the bell housing and transmission.

The engine will be going out for boiling after we seat the valves and hone the pistons. You can see a video of her in action last July.
http://youtu.be/xKMAMmdUurg

After this one is done, we've got a Farmall H (1947?) to do, then a very early serial # Cub Cadet and 1950's Cub that really just needs a paint job.

We're looking forward to being a solid contributor to this forum. We're happy for the knowledge received already - thanks so much for running this site.

Ken

Re: Greetings from Altamont, NY

Posted: Sun Mar 17, 2013 3:54 pm
by Rudi
Ken:

Glad you have found us and decided to take part. Enjoy the ride. As you know already, it is going to be a lot of fun :{_}:

Re: Greetings from Altamont, NY

Posted: Sun Mar 17, 2013 5:02 pm
by RaymondDurban
Welcome to the Forum! Glad to have you with us!

Re: Greetings from Altamont, NY

Posted: Sun Mar 17, 2013 5:16 pm
by Donegal Cub
Greetings from the Emerald Isle on this special day St. Patrick's Day for the Irish. This is a truly international forum, the best on the planet :{_}: Welcome to the best bunch of experts on cubs and almost everything :roll: Enjoy the craic :lol:
Donegal Cub

Re: Greetings from Altamont, NY

Posted: Sun Mar 17, 2013 5:33 pm
by Mike in Louisiana
Ken, Welcome to the forum

Re: Greetings from Altamont, NY

Posted: Sun Mar 17, 2013 6:04 pm
by beaconlight
Ken welcome

Re: Greetings from Altamont, NY

Posted: Sun Mar 17, 2013 6:54 pm
by dgrapes59
Welcome to the forum!

Re: Greetings from Altamont, NY

Posted: Sun Mar 17, 2013 7:23 pm
by PVF1799
Thanks to all for the kind welcome. I'll get to posting pics of the project in the proper forum. It's gonna be amazing when it's done.

Best regards to all - Happy St.Patricks Day.

Re: Greetings from Altamont, NY

Posted: Sun Mar 17, 2013 7:27 pm
by Wakulla Bill
Welcome to the forum Ken. You have hooked up with some good folks :)
Bill