New to Farmall Cubs

Post your introduction and "get to know me" information in this forum.

Moderator: Team Cub

Cloudy_Cowboy
Posts: 2
Joined: Wed Oct 19, 2016 9:52 am
Zip Code: 20695

New to Farmall Cubs

Postby Cloudy_Cowboy » Wed Oct 19, 2016 9:59 am

Hi My name is Justin Butler and I recently was given a 1948 Farmall Cub with the small 6 plow implements. It is in great condition for its age. It is missing some of the attachments for making the two rear plows move up and down with the front attachments. I am new to this tractor and I don't know that names for all the parts yet. I was wondering if anyone had any good pictures of the setup for the linkages from the from hydraulics to the back pivot points. Mine implements are in pieces and I want to get them in working order. Also I would like to find a swinging draw arm that I can attach a ball to. If anyone knows where to direct me I would greatly appreciate it. I am in Southern Maryland.

Thanks and I'm greatful to be apart of your community.

Justin

Jim Becker
Team Cub
Team Cub
Posts: 12731
Joined: Sun Feb 02, 2003 2:59 pm
Zip Code: 55319
Circle of Safety: Y
Location: MN

Re: New to Farmall Cubs

Postby Jim Becker » Wed Oct 19, 2016 10:36 am

It sounds like you are describing a Cub-144 cultivator. I suggest you look on the TM Tractor Parts web site (link below) and look at the implement hookups in the picture gallery. Here is short cut http://www.tmtractor.com/tm-tractor/gim/gim_001.htm. Click on the cultivator links at the bottom of the page.

You may find it helpful to look at some of the other implement pictures. Look at the Cub-193 plow for a better picture of the rear rockshaft, which may be what your question is about.

Bob McCarty
Team Cub
Team Cub
Posts: 8100
Joined: Tue May 25, 2004 8:02 pm
Zip Code: 80501
Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
Circle of Safety: Y
Location: CO, Longmont

Re: New to Farmall Cubs

Postby Bob McCarty » Wed Oct 19, 2016 10:42 am

Justin, Welcome to the Forum. In addition to what Jim said, in the tool bar above you can download owner, service, parts, and implement manuals by clicking on PDF Manuals. The how to forum also has good information on some of the more common maintenance/repairs required by Cubs. I'd suggest placing a "wanted" in the Vine forum for the swinging drawbar.

Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein

User avatar
Stanton
Team Cub Mentor
Team Cub Mentor
Posts: 4127
Joined: Mon Jun 22, 2009 6:56 am
Zip Code: 64070
Tractors Owned: 1942 Farmall AV, serial #87025
1945 Farmall H, serial #213,651
1947 Farmall Circle Cub, serial #2116
1948 Farmall Cub, serial #46066
Circle of Safety: Y
Location: Lone Jack, MO

Re: New to Farmall Cubs

Postby Stanton » Thu Oct 20, 2016 6:25 am

Welcome to the forum, Justin. :coffee:
Stanton
Image Circle of Safety

User avatar
Mike in Louisiana
10+ Years
10+ Years
Posts: 5823
Joined: Tue Feb 15, 2005 10:10 am
Zip Code: 71023
Circle of Safety: Y
Location: LA, Doyline

Re: New to Farmall Cubs

Postby Mike in Louisiana » Thu Oct 20, 2016 9:55 am

Justin, welcome to the forum.
1975 cub (LouAnn) serial # 245946, 1941 John Deere Model H

Good judgment comes from experience,
and a lot of that comes from bad judgment. Will Rogers


Return to “Introduce Yourself”

Who is online

Users browsing this forum: No registered users and 2 guests