Hello everybody,
My name is Milosh and I'm from Serbia, Europe. I need some informations and I think this is the right place... During the seventies in West Germany, my grandfather bought Farmall McCormick International D320. I inherited this tractor together with grandfather's estate. It's very good tractor but needs restoration. I need it for small operations in my orchard (I'm growing plumbs)...
I need manuals or instructions... It is hard to find spare parts(filters, heaters etc.) so I'm wondering if I could use spare parts from other engines which are compatibile with Farmall.
Thank you and sorry for my bad english.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
New guy from Serbia, boring continent - Europe
-
- 5+ Years
- Posts: 1
- Joined: Sun Dec 04, 2016 2:44 pm
- Zip Code: 00000
-
- Team Cub
- Posts: 11851
- Joined: Tue May 25, 2004 8:02 pm
- Zip Code: 80501
- Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
- Circle of Safety: Y
- Location: CO, Longmont
Re: New guy from Serbia, boring continent - Europe
Milosh, Welcome to the Forum. I'm not familiar with the diesel 320, but hopefully someone else here can give you some information. Your English is fine.
Bob
Edit: Here is a website that might help: mccormick-freunde.de
Bob
Edit: Here is a website that might help: mccormick-freunde.de
"We don't need to think more,
we need to think differently."
-Albert Einstein
we need to think differently."
-Albert Einstein
- Mike in Louisiana
- 10+ Years
- Posts: 7825
- Joined: Tue Feb 15, 2005 10:10 am
- Zip Code: 71023
- Circle of Safety: Y
- Location: LA, Doyline
Re: New guy from Serbia, boring continent - Europe
Milosh, Welcome to the Forum.
1975 cub (LouAnn) serial # 245946, 1941 John Deere Model H
Good judgment comes from experience,
and a lot of that comes from bad judgment. Will Rogers
Good judgment comes from experience,
and a lot of that comes from bad judgment. Will Rogers
- Stanton
- Cub Pro
- Posts: 7760
- Joined: Mon Jun 22, 2009 6:56 am
- Zip Code: 64070
- Tractors Owned: 1942 Farmall AV, serial #87025
1947 Farmall Circle Cub, serial #2116
1948 Farmall Cub, serial #46066 - Circle of Safety: Y
- Location: Lone Jack, MO
Re: New guy from Serbia, boring continent - Europe
Welcome the forum, Milosh. We are glad you joined.
Found this info on TractorData.com:
http://www.tractordata.com/farm-tractors/004/6/4/4645-international-harvester-d-320.html
Found model 320 on the Case-IH website, Parts:
http://partstore.caseih.com/us/parts-search.html#epc::mr51462ag42715
You might want to contact Case-IH directly and ask them if they can help you find a paper copy of the 320 Manual.
Hope this helps.
Found this info on TractorData.com:
http://www.tractordata.com/farm-tractors/004/6/4/4645-international-harvester-d-320.html
Found model 320 on the Case-IH website, Parts:
http://partstore.caseih.com/us/parts-search.html#epc::mr51462ag42715
You might want to contact Case-IH directly and ask them if they can help you find a paper copy of the 320 Manual.
Hope this helps.
-
- Team Cub
- Posts: 17272
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: New guy from Serbia, boring continent - Europe
Stanton's partstore link is for the Case 320, totally different from the D320.
From what I have seen, the D320 uses the DD-99 engine, which was also used in DED, DED-3, and D322. These models were all made in Neuss. None were imported to the USA, so most members here will not be able to provide much information. Maybe you can get some information from this site http://www.ihace.de/inhalt.htm (It is German language.) Their manual page says to contact them about English language manuals.
Did your grandfather use it in W. Germany, or buy it there and bring it to Serbia? Did you bring it to Serbia?
My grandfather was from an area that is now in Serbia. although the town has been in several countries since he left.
From what I have seen, the D320 uses the DD-99 engine, which was also used in DED, DED-3, and D322. These models were all made in Neuss. None were imported to the USA, so most members here will not be able to provide much information. Maybe you can get some information from this site http://www.ihace.de/inhalt.htm (It is German language.) Their manual page says to contact them about English language manuals.
Did your grandfather use it in W. Germany, or buy it there and bring it to Serbia? Did you bring it to Serbia?
My grandfather was from an area that is now in Serbia. although the town has been in several countries since he left.
- Stanton
- Cub Pro
- Posts: 7760
- Joined: Mon Jun 22, 2009 6:56 am
- Zip Code: 64070
- Tractors Owned: 1942 Farmall AV, serial #87025
1947 Farmall Circle Cub, serial #2116
1948 Farmall Cub, serial #46066 - Circle of Safety: Y
- Location: Lone Jack, MO
Re: New guy from Serbia, boring continent - Europe
Jim Becker wrote:Stanton's partstore link is for the Case 320, totally different from the D320.
Thanks, Jim. Didn't mean to confuse anyone.
- Buzzard Wing
- Cub Pro
- Posts: 10540
- Joined: Mon Aug 09, 2004 10:14 pm
- Zip Code: 02840
- Location: RI, Newport
Re: New guy from Serbia, boring continent - Europe
I cannot help you much with your tractor (seems to only be European). But I have have been seen in Belgrade on a bicycle many years ago (1990). Traveled from there to Bar, Montenegro by rail and up the coast by bike. I still ride the same bike today!
About the only word I remember is pivo....
About the only word I remember is pivo....
1971 Cub (Rufus) 1950 Cub (Cathy) 1965 Lo Boy Fast Hitch (Nameless III) 1970 Cub 1000 Loader & Fast Hitch (Lee)
Return to “Introduce Yourself”
Who is online
Users browsing this forum: No registered users and 3 guests