1. Ensure that you have at least 6 inches of exhaust pipe surpassing the hood.
2. If your pipe is too short you are likely to burn or bubble the paint as seen here
3. If you rebuilt the engine or had fluids above the cylinders be sure you run the motor long enough to dry out the top end of the engine to prevent burning, fading and otherwise discoloring of the new decals that you put on your freshly painted hood.
3. Make sure the muffler clamp, is clamped away from the hood (turned out). Shown incorrectly installed here
Correctly installed here
4. If you clamp the muffler over the hood and have a short pipe, you will bubble your new paint. As seen here in this picture. It may be hard to see a 3 dimension object in the picture, but trust me there is bubbles there. They are located where i cleaned the hood with my fingers to the right after i moved the clamp to the outside.
5.I hope my mistakes in learning, will prevent you problems with your project.
John
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
How to install Vertical Exhaust
-
- 10+ Years
- Posts: 6547
- Joined: Mon Jul 25, 2005 10:16 pm
- Zip Code: 61944
- Tractors Owned: -
55 F-Cub - snow plow and chains
3 Demonstrators Restored.
"Bette" - 22 mower
"Roxie" - 144 Complete Cults'
"Sandy"(Done) 193 Plow
1950 Demo, "Billie"
-(Woods 59")
Corn Stalk Cutter
23a Disc
&
2005 Mahindra w/FEL - Circle of Safety: Y
- Location: IL, Paris just off of Interstate 70
-
- Similar Topics
- Replies
- Views
- Last post
-
- 10
- 561
-
by Clemsonfor
Mon Oct 25, 2021 8:16 pm
-
- 1
- 913
-
by Rodney51Cub
Sat Jun 25, 2022 8:58 pm
-
-
New cylinder sleeve, bore after install? Attachment(s)
by Countrytour » Thu Dec 22, 2022 12:55 pm » in Farmall C, Super C, 200 & 230 - 4
- 1191
-
by SamsFarm
Thu Dec 22, 2022 10:29 pm
-
-
-
Farmall 54 plow/dozer blade install on Lo Boy
by Sflash » Mon May 17, 2021 8:10 am » in Lo-Boy Series - 154, 184, 185 - 1
- 409
-
by SONNY
Tue May 18, 2021 12:05 am
-
-
-
Kohler Carburetor Seat Removal/Install Attachment(s)
by AL Farmall Boy » Wed Oct 19, 2022 10:43 am » in Cub Cadet - 5
- 1565
-
by Cubfriend
Sun Oct 30, 2022 7:00 pm
-
Return to “Engine, Clutch, Transmission and Hydraulics”
Who is online
Users browsing this forum: No registered users and 0 guests