Switch to full style
Time saving tips to keep your Cub running smooth
Topic locked

How To Restore a Manifold

Mon May 04, 2009 9:46 pm

Here is what I did to renew/restore the manifold for my 57. I used two products made by the company Por 15. First was "Fire Seal 2000" which can withstand temps up to, you guessed it, 2000 degrees. This product is intended to fill pitting and cracks in manifolds and exhaust systems. The second was "Por 20" which is another high heat treatment that has an aluminum finish. The pics tell the rest:

Here is the manifold still mounted. Plenty of rust and serious pitting.

Image

Manifold after being sandblasted.

Image

Manifold after grinding out all of the peaks and imperfections. I used a dremel with a grinding attachment and then sandblasted it again.

Image

Now the Fire Seal 2000 was applied to fill the imperfections.

Image

After Fire Seal was dry, two coats of Por 20 were applied.

Image

Image

Total time spent about 2 hours. Beats buying a new one :{_}:
Topic locked