- All parts must be thoroughly cleaned before re-assembling.
- You must lubricate everything when putting it back together.
- Make sure the hydro fluid gets into the pump from its lines before running the tractor.
- Running the pump while dry will quickly ruin it.
- The repair kits come with extra parts that will not be needed and the directions with the kits are not that good. They only cause confusion on where the parts go. Refer to the pictures here to get it done right.
- Enjoy......
How To Rebuild a Touch Control Pump
Moderator: Team Cub
-
- 5+ Years
- Posts: 545
- Joined: Thu Dec 25, 2008 2:44 pm
- Zip Code: 07461
- Tractors Owned: 1957 Cub, 1951 Cub, 198? JD 500C, 1954 Oliver OC3
- Location: NJ, Sussex County
How To Rebuild a Touch Control Pump
Here is a pictorial on how to rebuild a touch control pump. A few things to keep in mind:
Last edited by Barnyard on Sun Apr 22, 2018 9:39 pm, edited 1 time in total.
Reason: Added Missing Images
Reason: Added Missing Images
I know a little about everything and alot about nothing....
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Touch control and pump rebuild Attachment(s)
by J3 Driver » Sun Apr 08, 2018 7:45 pm » in Farmall Cub - 8
- 318
-
by Shane Nelson
Sat Apr 21, 2018 8:28 am
-
-
- 18
- 654
-
by Bill Hudson
Fri Jan 20, 2017 6:47 pm
-
-
Unusual touch control pump Attachment(s)
by John *.?-!.* cub owner » Wed Nov 02, 2016 10:18 pm » in Farmall Cub - 2
- 241
-
by inairam
Thu Nov 03, 2016 1:06 pm
-
-
- 5
- 297
-
by John *.?-!.* cub owner
Sun Dec 11, 2016 10:11 am
-
- 2
- 138
-
by DRaymond
Fri Apr 28, 2017 8:59 pm
Return to “Engine, Clutch, Transmission and Hydraulics”
Who is online
Users browsing this forum: No registered users and 1 guest