Changing Oil Bath Filter Oil Cup

Time saving tips to keep your Cub running smooth

Moderators: Barnyard, Team Cub

Changing Oil Bath Filter Oil Cup

Postby Mike in Louisiana » Thu Dec 10, 2009 9:39 am

While letting my 14 Year old grandson Zack Morris change the oil in the Cub, I also had him clean and replace the oil in the Oil Bath Filter Oil Cup. As you know they are a pretty good fit at the bottom after the spring clip is moved over to the side they are some times hard to remove. I just let him try his way until he gave up on his own and said PAPA I can't get it off.

Then I showed him how I do it.

Image

Image

Just take the Oil Bath Filter Cap off the top of the Assembly, slide the Spring Clip holding the Cup to the front or back,which ever gives you the most clearance. Then take a long screw driver put it through the hole,

Image

and simply bump the bottom of the Cup from the inside with one hand under the the Cup to catch it.

Image

After cleaning the cup replace oil up to the full line with what ever oil you use in the tractor.
1975 cub (LouAnn) serial # 245946, 1941 John Deere Model H

Good judgment comes from experience,
and a lot of that comes from bad judgment. Will Rogers
User avatar
Mike in Louisiana
5+ Years
5+ Years
 
Posts: 4309
Joined: Tue Feb 15, 2005 10:10 am
Location: LA, Doyline
Zip Code: 71023
Circle of Safety Award
Circle of Safety: Y

Return to Engine, Clutch, Transmission and Hydraulics

Who is online

Users browsing this forum: No registered users and 0 guests