Switch to full style
Tips and tricks on repairs to your Cub’s structure.
Topic locked

Throttle quadrant

Tue Jan 29, 2008 12:46 am

Just yesterday this subject came up in another thread...
http://www.farmallcub.com/phpBB2/viewtopic.php?p=223756&highlight=#223756

So the camera came out today to record the remedy. Here are a couple badly worn throttle quadrants that were on their 10th life... past worn out.

Image

Here is the plan. Note that the quadrant also wears opposite the notches. Likewise the lever wears both on the tooth and wears a groove opposite the tooth.

Image

Here are the parts ready for the torch. The teeth have been cut away and all is ready for the replacement strips.

Image

The welding is done and ready for cleanup.

Image

The extra metal is trimmed away and the surfaces ground flat.

Image

The notches laid out and one of them cut and filed. It's much like filing a hand saw.

Image

Here's one of them back on RatCub.

Image

I think both of these are all set for another 60 years if used carefully.
Topic locked