C-22 Mower Guard

How to fix them and how to use them.

Moderators: Barnyard, Team Cub

User avatar
John(videodoc)
10+ Years
10+ Years
501 Club
501 Club
Posts: 6532
Joined: Mon Jul 25, 2005 10:16 pm
Zip Code: 61944
Tractors Owned: -
55 F-Cub - snow plow and chains
3 Demonstrators Restored.
"Bette" - 22 mower
"Roxie" - 144 Complete Cults'
"Sandy"(Done) 193 Plow
1950 Demo, "Billie"
-(Woods 59")
Corn Stalk Cutter
23a Disc
&
2005 Mahindra w/FEL
Circle of Safety: Y
Location: IL, Paris just off of Interstate 70

C-22 Mower Guard

Postby John(videodoc) » Thu Sep 27, 2007 7:28 pm

With many of us going to shows with a mower and such, we want to be safe with a mower. As has been suggested i have built a mower guard for my 4 1/2 foot c-22 mower. The basic principle of this guard will remain the same, just the length will be different.

1. using 1x8 standard pine board, cut two pieces to 52"

Image

Image

2. Rip two pieces that are two inches wide and 52" long.

Image

3. Using 3" wood screws (decking screws) square up all four boards and screw together.

Image

4. Paint to suit your tastes. :D

Image

5. Procure 6 eye hooks

Image

6. Install them in equal thirds on the bottom of the guard.

Image

7. Install on your mower, and using a long bungy cord, wrap around the hooks.

Image


John

Return to “Implements”

Who is online

Users browsing this forum: No registered users and 0 guests