My 23-A disc harrow didn't have the rear gang set when I bought it last year. So, with some help, I received the dimensions and fabricated the set.
Don't have a torch, so fired up the grill...
Then, got out my hammer, vise and welding gloves...
Added the bar stock (1/4" x 1-1/2")...
Waited about 5-10 minutes and put it in the vise. Hammered one way...
Then the other...
Dipped it in a bucket of water, dried it off, and downstairs to the shop for measuring, drilling and fitting...
All complete and assembled on the disc...
Still need to get the stabilizing bar on the rear set, but that'll have to wait 'til later.
Here are the dimensions for the gang bar and clevis set:
Hope this helps.
How to fix them and how to use them.
Moderators: Barnyard, Team Cub
1 post • Page 1 of 1
- Team Cub Mentor
- Posts: 3967
- Joined: Mon Jun 22, 2009 6:56 am
- Zip Code: 64070
- Tractors Owned: 1942 Farmall AV, serial #87025
1945 Farmall H, serial #213,651
1947 Farmall Circle Cub, serial #2116
1948 Farmall Cub, serial #46066
- Circle of Safety: Y
- Location: Lone Jack, MO
- Similar Topics
- Last post
by John *.?-!.* cub owner
Tue May 24, 2016 11:06 am
by Our Pass Thyme
Wed Oct 12, 2016 5:18 pm
Sat Jan 28, 2017 8:38 am
Sun Feb 14, 2016 8:05 pm
Thu Jun 25, 2015 3:49 pm
Who is online
Users browsing this forum: No registered users and 0 guests