193 Plow depth lever eye bolt (Updated w/mounted pics)

Sat Aug 25, 2012 9:26 pm

So I needed a new eye bolt for my 193 plow and was thinking I'd need to buy one or rig something up when I came across this at the local hardware store: (Except mine was only 8" long)
http://www.acehardwareoutlet.com/Produc ... =998082270

It's a 5/8" bolt hook. It was super easy to convert it into a near perfect replacement.
It's already got 5/8-11 threads, a head width that's about perfect, and has a pin pressed into it that's about 5/8".

I used a cutoff wheel to cut off the pin, then pressed it out. Then I drilled the hole out to 5/8" for the clevis pin that holds it to the dog bone.
Then I cut the threaded portion to length and cleaned up the threads.

That's it. I had about $6 in it and it bolted up perfectly.

I'm not saying it's gonna work for an original type replacement for the serious collector, but for a working tractor it's just fine.
Here's a before and a couple after pics.
Hope this helps some of you out.


You do not have the required permissions to view the files attached to this post.
Last edited by grasser on Sun Aug 26, 2012 6:12 pm, edited 2 times in total.