This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Radiator Cap
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
- superman
- 10+ Years
- Posts: 65
- Joined: Tue Jan 15, 2013 10:41 am
- Zip Code: 70359
- Tractors Owned: 1952 F-CUB
Radiator Cap
I have developed a small leak in the upper radiator outlet/fan bracket support on my Super AV. I notice some minor pitting when I reassembled the tractor, I ignored it thinking it would not be a problem. So I broke it all back down and now I'm going to JB weld this area flat again. I am using a 7 psi radiator cap and was wondering if this is a problem too. It is still a thermo-syphon system with no water pump. Is 7 psi to much pressure for this system? Is any one else running 7 psi cap thermo-syphon with no problems?
-
- Team Cub
- Posts: 17272
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: Radiator Cap
7 should be fine, probably about what it started with.
- superman
- 10+ Years
- Posts: 65
- Joined: Tue Jan 15, 2013 10:41 am
- Zip Code: 70359
- Tractors Owned: 1952 F-CUB
Re: Radiator Cap
Thanks
Return to “Farmall A, Super A, AV, 100, 130 & 140”
Who is online
Users browsing this forum: No registered users and 12 guests